An overview of the constructions of conveyors for moving bulk materials, comparison and study of their parameters
Journal Title: Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini - Year 2024, Vol 1, Issue 103
Abstract
The production of concrete mixes, along with their use in the production of building materials and structures, is one of the key processes in the construction industry during the construction, restoration and repair of buildings and structures. Because of this, the need to create modern concrete mixing plants that will meet the requirements of minimum energy consumption and maximum productivity of concrete mixture production is an urgent task. Not only the main operations, which include the dosing of the components of the mixture and their mixing, but also the maintenance operations, namely operations that ensure the timely movement of the components of the concrete mixture from warehouses to the main technological equipment, affect the set rhythm of the concrete mixture production. Conveyors of various types and designs are used to move bulk materials, such as crushed stone and sand. For the rational selection of such equipment in accordance with the characteristics of the cargo to be transported, knowledge of the types of conveyors, their structures and parameters, understanding of operation issues and methods of parameter calculation are required. In addition, it is worth paying attention to the following parameters: maximum cargo transportation productivity, low energy consumption per unit of moved products, low metal content of the structure. The work reviewed the most common designs of conveyors used to move bulk materials in concrete mixing plants, analyzed the disadvantages and advantages of conveyors, as well as technical parameters. As a result, the predominant directions for the use of belt and plate conveyors at construction enterprises were determined. The advantages of belt conveyors, which contribute to their widespread distribution, are high productivity, simplicity of design, reliability, quiet operation, low specific power consumption. When choosing a conveyor, it is recommended to choose the equipment with the highest productivity and the lowest power of the drive motors, however, the performance should be clearly related to other technological equipment.
Authors and Affiliations
Oleksandr Diachenko, Maksym Delembovskyi, Kateryna Levchuk, Oleg Protyven
Keywords
Related Articles
- EP ID EP745275
- DOI https://doi.org/10.32347/gbdmm.2024.103.0301
- Views 38
- Downloads 0
Development of the technology of restoration of the tail part of the body of the cutter of the road cutter
Purpose. The purpose of this work is to study the patterns of wear and develop a technology for restoring the tail part of the cutter body of the road cutter. They conducted an analysis of the wear of the cutters and fou...
Calculation of horizontal collective drainage pipelines of reclamation systems in the presence of a ground water level slope
The purpose of this work is to develop a method-ology for calculating the parameters of pressure horizontal collective drainage pipelines of recla-mation systems that operate in the presence of a ground water level slope...
Determination of dynamic loads in the crane suspension when lifting a load from a rigid base
Loading and unloading works are an integral part of the construction process. Cranes of various types were mostly use to perform these works. To ensure trouble-free operation and increase the reliability of cranes, when...
Justification and static calculation of the adaptive moving counterweight of a single-bucket excavator
The results of an analytical study of the effect of loads on the equipment of a single-bucket excavator are presented, and an analysis of previous studies is performed. The work highlights that the work process of a uni...
Research of relationships between the technical parameters of industrial manipulators
Industrial manipulators have to become an inte-gral part of modern construction production, play-ing a key role in the automation and optimization of production processes. When designing and using industrial manipulators...