ANALOG DOT RECORDING AS AN EXEMPLARY PROBLEM IN THE AREA OF DYNAMIC MEASUREMENTS<br />
Journal Title: Metrology and Measurement Systems - Year 2008, Vol 15, Issue 1
Abstract
Analog recorders as typical measuring instruments disappear from contemporary equipment due to progress of digital measurements and common possibilities of measurement data storage in a computer memory. However, recorders can be improved by application of the idea of modelbased control. It creates new, even surprising possibilities. These incline to deep considerations.
Authors and Affiliations
ADAM ŻUCHOWSKI
EXPLORING NEW FRONTIERS OF INSTRUMENTATION AND METHODS<br /> FOR ELECTRICAL AND ELECTRONIC MEASUREMENTS IN LIGHT OF THE IMEKO TC4 SYMPOSIUM IN FLORENCE, ITALY, SEPTEMBER 2008
From 21st to 24th September 2008, at the University of Florence, Morgagni Conference Center, significant scientific events took place , held under the auspices of the International Measurement Confederation. These events...
STABILITY OF AN OPTICAL DISPLACEMENT SENSOR USING A TWO-BEAM POLARIZATION INTERFEROMETER
Optical interferometers can measure displacement with a resolution of tens of picometers. Polarization interferometers are often used in such measurements, as they exhibit much lower sensitivity to most of the perturbati...
STABILIZED TEMPERATURE MEASUREMENTS BASED ON THERMOOPTIC MEMORY PHENOMENA
Investigations of non-linear phenomena in A2MX4 (where: A - organic cation or ion of alkaline metal, M - metal, X - halogen) crystals with incommensurate phases are very interesting both from scientific and practical poi...
DEVELOPMENT AND VALIDATION OF A SELECTIVE METHOD FOR THE DETERMINATION OF CHRYSENE USING SILVER-ENHANCED ROOM-TEMPERATURE PHOSPHORIMETRY<br />
A factorial design was applied for the development of a solid surface room-temperature phosphorimetric method aiming the selective determination of chrysene. Data analysis was made using statistical experimental analysis...
PARTICULARITIES OF THE CYCLIC A/D CONVERTERS ENOB DEFINITION AND MEASUREMENT
The paper is devoted to the methods of accurate assessment and analysis of the expected and actual effective number of bits (ENOB) of cyclic analog-to-digital converters. The equivalence of definition of ENOB in the IEEE...