THE DEPENDENCE OF BRASS HARDNESS MEASUREMENT SYSTEM ON TIME
Journal Title: Metrology and Measurement Systems - Year 2007, Vol 14, Issue 4
Abstract
Measurement system analysis (MSA) was used for estimation of hardness (HBS) measure- ment system capability. The time dependence of capability was evaluated. Experimental material Cu-Zn-Al cast alloy was used as shape memory alloy. The average and range method with 2 appraisers, 10 samples and 3 trials (indentations). was used to quantify repeatability (% EV), reproducibility (% AV) and part variation (% PV - variation between samples). The measurement was repeated 5 times in intervals of 7 days. As the values of %GRR are between 89.4% and 63.7% and values of "ndc" between 0.71 and 1.71 the used hardness measurement system is not capable and it depends heavily on the long-term variability.
Authors and Affiliations
JOZEF PETRÍK, VOJTECH ŠPETUCH
Keywords
Related Articles
- EP ID EP83141
- DOI -
- Views 82
- Downloads 0
NEW INSTRUMENTS TO MEASURE PARAMETERS OF INFRA-LOW FREQUENCY VOLTAGE SIGNALS<br />
The paper presents the design, the principles of operation and the technical specification of two types of infra-low frequency voltage instruments: the integrating converter instrument and the microprocessor instrument....
MODELS OF BIAS OF MEAN SQUARE VALUE DIGITAL ESTIMATOR FOR SELECTED DETERMINISTIC AND RANDOM SIGNALS
The article presents the probability density functions as well as characteristic functions of selected periodic and random signals. On their basis, original models of the bias of the mean square value digital estimator...
UNCERTAINTY EVALUATION OF THE PROCESSING ALGORITHM OF A TIME-VARIABLE QUANTITIES IN MULTI-CHANNEL MEASUREMENT SYSTEMS
In this paper the application of the generalised law of uncertainty propagation in determining the standard uncertainty of measurement in a multi-channel sampling transducer has been proposed. It has been shown that for...
RESEARCH ON HYSTERESIS OF TRIGGERING PROBES APPLIED IN COORDINATE MEASURING MACHINES
The article presents selected results of investigation of triggering probe hysteresis in coordinate measuring machines. The research covered the hysteresis of pretravel of one-stage triggering probes equipped with a swit...
THE SOURCE OF ERRORS IN THE OSCILLOMETRIC BLOOD PRESSURE MEASUREMENTS
This report presents an analysis of the source of errors in the blood pressure measurements which use the oscillometric method. The basis of this method are the blood pressure oscillations in the occluding cuff which are...