Analysis Effect of Sedimentation at MHP Type Turbine Open Flume on Irrigation Channel
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 1
Abstract
The MHP utilization in irrigation canals wear Plopeler Open Flume turbine type. PLTMH of this type, in the rainy season affects the quality of the electrical power produced, such as the generator voltage V (Volt), turbine / gen n (rpm), and frequency (Hz). This research method is done with 5 -step procedure of four variables measured data from three case s cenarios ie when there is no rain, the rain and after rain. The result analysis was conducted on all statistical calculations visible negative correlation means that if kosenrtasi sedimentation C increases, the voltage generator, turbine-generator rotation n (rpm), and the frequency f (Hz) of The MHP is going down. From test the hypothesis stated that there is a significant relationship with the t-test of 16.92, then t count> t table at α = 5%. namely 2101. By the time the rain to kosenrtasi sed imentation C (g / lt) C = 1.00 to 2.50 g / l (medium), 2.50 to 5.00 g / l ugly with voltage deviation Vd = 17.6%, deviation Fd frequency deviation = 6.8% and 6.8% round Nd = The MHP abnormal conditions. Given this research can be a reference for the exploitation of MHP by communities around the irigas channel as a reference basis for the development of the National Irrigation Project.
Authors and Affiliations
Arifin Matoka, Nadjamuddin H. , Salama M. , M. Arsyad T.
Keywords
Related Articles
- EP ID EP389725
- DOI 10.9790/9622-0701025057.
- Views 111
- Downloads 0
Influence of Process Parameters on Mechanical Properties and Printing Time of FDM PLA Printed Parts Using Design of Experiment
Fused deposition modeling (FDM) is one of the most popular additive manufacturing technologies for various engineering applications. FDM is an additive manufacturing technique for rapid prototyping which can build comple...
Modeling and Analysis of a Manufacturing Plant Using Discrete Event Simulation
Today‟s manufacturing systems are characterized by large number of complexities such as random arrival patterns of jobs, random processing times, random failure rates, random repair times, random rejection of parts, etc....
Post Earthquack Slope Stability Analysis of Rubble Mound Breakwater Amin Moradi1 ,
Rubble mound breakwaters are structures built mainly of quarried rock. Generally armourstone or artificial concrete armour units are used for the outer armour layer,which should protect the structure againist wave attack...
A finite element study to compare the forces generated by a newly designed NITI file with an established rotary file
Aim: Aim of this study is to evaluate the lateral forces on the instrument in the apical 3rd of curved canal with two Nickel Titanium rotary systems. Methodology: One brand of instrument RaCe no 25 was scanned with micro...
Optimization of Surface Roughness and Material Removal Rate of Aluminium Alloy Using Taguchi Method
Machining involves many process parameters. To achieve accurate dimensions, good surface quality and to maximize metal removal rate, the turning parameters contributes significantly. The aim of this research is to optimi...