ANALYSIS OF A PART USING DYNAMIC SIMULATION AND REAL TIME EXPERIMENTS IN PART FEEDERS
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 4
Abstract
In the modern industrial world, agility in manufacturing and assembly line is the key for improving the productivity. Segregation and feeding of parts in assembly line is important for reducing the manufacturing lead time. The segregation and feeding of parts are either done manually, which is a time consuming work or by installing robots with machine vision system, which is costly. To overcome this problem, Part feeders are used for feeding the parts in a single orientation. Trap is a system which changes the orientation of part and stores the part in an expected orientation. The objective of this work is to explore the real time monitoring and dynamic simulation of the trap in a part feeding system. An experimental setup fabricated to perform vibration analysis on the trap. The vibration analysis will help in determining the various frequency levels by conducting various trails during experiments. The work includes multi body dynamic simulation for a part on the trap. It helps to study the dynamics of moving parts in a trap. In this paper, a comparison is made between dynamic simulation and real time experiments, the outcomes show that there are strong similarities between the results of dynamic simulation and real time experiments.
Authors and Affiliations
SURESH M, BARATHWAJ S. A
Keywords
Related Articles
- EP ID EP430417
- DOI 10.24247/ijmperdoct201817
- Views 61
- Downloads 0
DETECTION OF SHIP VIBRATIONS AND ABSORPTION TECHNIQUES
Ship Vibration is a major problem which occurs frequently in the on-board vessel. Excessive ship vibration may result in fatigue failure of local structural members, malfunctioning of machineries and equipments. Ship vib...
Computational Analysis of Passive Cooling Technique Applied to A Room Under Naturally Induced Flow
In 21st century, the global warming has become great threat to mankind. The Air Conditioner became mandatory for room cooling in all the households which releases poisonous gases like CFCs and CO2 and also depends on ele...
An Industrial IOT in Engineering and Manufacturing Industries - Benefits and Challenges
Industry 4.0 is the promising area of the industrial revolution and fast-growing network of digitally connected smart devices, equipment/machines and physical objects. It denotes the use of Industrial Internet of Things...
Multi Response Objective Optimization of Friction Stir Welding Parameters of Dissimilar Metals of AA 6061 Aluminum and IS319 Brass Joining Through Taguchi’s Method
Dissimilar metals welding can be used where, combination of properties light weight and high strength was interested. Aluminium and Copper and its alloys are light metals have special properties, such as high electrical...
COMPARATIVE ANALYSIS FOR COEFFICIENT OF FRICTION OF LM 25 ALLOY AND LM 25 GRANITE COMPOSITE AT DIFFERENT SLIDING SPEEDS AND APPLIED PRESSURE
In today’s competitive world material researchers are based on cost-efficient, lightweight, performance efficient and environment-friendly replacements of traditional metals and their alloys. Most of the engineering appl...