Analysis of Changes in the Internal Structure of PA6.6/PET Fabrics of Different Weave Patterns under Heat Treatment
Journal Title: Fibres and Textiles in Eastern Europe - Year 2015, Vol 23, Issue 4
Abstract
Conveyor belts are widely used in almost all fields of industry, agriculture and architecture. They are also used in mines of raw materials and minerals, in the cement and lime industry, in paper and sugar mills, as well as in agriculture, power and etc. Conveyor belts consist of a woven fabric carcass and rubber covers. In the production process, polyamide polyester vulcanised fabrics are subjected to high temperatures. The aim of the study was to examine how the process of heat treatment affects the internal geometry of synthetic fabrics and what the impact of the weave on these changes is. An experiment was performed by subjecting nine samples of polyester and polyamide fabrics of different weave to heat treatment at 160 °C for 5, 10 and 15 minutes. The scheduled study was to mirror the conditions prevailing in the vulcanisation. Analysis of the measurements of the basic parameters characterising the internal structure of fabric shows that the weave affects the size of their changes during exposure to high temperatures.
Authors and Affiliations
Marcin Barburski, Michał Góralczyk, Marek Snycerski
Keywords
Related Articles
- EP ID EP69001
- DOI -
- Views 93
- Downloads 0
Funkcjonalne włókna nanokompozytowe z poli(siarczku fenylenu) – wyniki wstępne
W artykule zaprezentowano kompozytowe włókna oraz włókniny z poli(siarczku fenylenu) wytwarzane metodą melt-blown. Do formowania włókien zastosowano laboratoryjną wytłaczarkę dwuślimakową, której konstrukcja pozwala na w...
Research on the flow characteristics of opening unit in the rotor spinning unit
The opening unit is an important device in a rotor spinning unit to comb fibres and remove trash. In this paper, numerical simulation is carried out to study the flow structure in the rotor spinning channel and the trash...
Investigation of Staple Yarns Modified by the Physical Vapour Deposition Method
The aim of the researh presented in this paper was to develop a technology for obtaining electrocondauctive yarns using the physical vapour deposition (PVD) technique, as well as methods for testing the yarns. The author...
Effects of the Functional Compound on the Properties of Composite Tape Yarns
While the functional compound Polycom JB 7100 is often introduced into polyolefins as a modifier, processing aid and bonding agent, little is known about its influence upon the basic structure and mechanical properties o...
Assemblage of Wool and Silk Textiles from Medieval Waste Layers in Prague, Czech Republic
The article summarises information on a large assemblage of medieval wool and silk textiles found during an archaeological excavation of waste layers from the fourteenth and fifteenth centuries in the centre of Prague. T...