Analysis of Exergy Efficiency and Ways of Energy Saving in Air Conditioning System for a Cleanroom
Journal Title: Energy Engineering and Control Systems - Year 2015, Vol 1, Issue 2
Abstract
In modern technologies, which are related to energy transformation, namely in air conditioning systems, important places are occupied by equipment and processes, the objective estimation of value of its energy perfection can be defined only on the basis of analysis of its exergy efficiency. So, reducing the cost of energy consumed by air conditioning systems preconditions the need for its optimization, which can be fully achieved by virtue of exergy analysis that takes into account not only the quantity but also the quality of energy spent. Nowadays cost estimates can’t be the only measure of effectiveness of energy equipment that is using energy resources. Exergy is a physical not an economical criterion and defines its independence from conjectural fluctuations of prices. At the same time, cost parameters don’t allow making long term predicting. The minimum should be defined not by financial costs but exergy losses per unit of received heat. Unfitness of just the financial costs is obvious. Analysis of exergy efficiency of the central straight flow air conditioning system (ACS) for cleanroom, that was gained on its innovation mathematical research model depending on different factors, which have influence on its work was presented in this article, and the ways of energy saving for this ACS was proposed. It was found that temperature difference between inside and supplied air in a room, temperature of inside air which depends on temperature of outside air and coefficient of transformation EER of refrigerator machine of ACS have the biggest impact on exergetic output-input ration of chosen air conditioning system.
Authors and Affiliations
Dmytro Harasym, Volodymyr Labay
Keywords
Related Articles
- EP ID EP255554
- DOI 10.23939/jeecs2015.02.077
- Views 99
- Downloads 0
Optimization of Gas Dynamical Subsystem of Transducers for Measurement of Gas Flow Temperature
The main types of errors which occur while measuring the temperature of gas flows, including flows of fuels, are determined by the conditions of thermal balance at the interaction of the sensor of the temperature transdu...
Simplified Method for Calculation of the Joule–Thomson Coefficient at Natural Gas Flowrate Measurement
This work deals with measurement of natural gas flowrate and volume by means of pressure differential devices. The existing methods for calculation of Joule-Thomson coefficient to be applied in pressure differential flow...
Genetic Algorithm Application for Synthesis and Analysis of Electromechanical Systems
One of modern possible problem solutions of analysis and synthesis in electromechanical systems is the recourse to a genetic algorithm as a method of artificial intelligence. The originality of the proposed approach lies...
Switching on Power Harmonic Filters
In modern industrial power supply systems, there is observed rapid growth of time varying nonlinear loads having low power factor. The most adequate engineering solution for reactive power compensation of the loads is us...
Digital Complex for Modeling Processes in Electric Circuits with Protection and Automatic Devices
The developed digital complex for modeling electromechanical and electromagnetic processes in electric circuits of any configuration with electromagnetic devices, control devices, synchronous and asynchronous motors incl...