Analysis of material flow and energy flow in collaborative pyrolysis of Chinese medicine residue

Journal Title: Energy Environmental Protection - Year 2023, Vol 37, Issue 6

Abstract

Pyrolysis is a mainstream technology for biomass energy utilization, but theoretical simulation, verification feedback on the coordinated pyrolysis process, material conversion rules, and energy efficiency characteristics of multi-source biomass wastes, particularly Chinese medicinal residue, arestill relatively scarce. In this paper, Aspen Plus industrial simulation software with a complete physical property system was used to establish a simulation model for biomass waste pyrolysis to produce carbon, and its reliability was verified. The actual pyrolysis process data of waste pine wood from agricultural forest source were systematically simulated, the material flow and energy flow during the pyrolysis process of the sargentgloryvine stem medicine residue was analyzed, and the conversion efficiency was comprehensively evaluated. The results showed that the energy consumption of the pyrolysis system was 2580.7 MJ/h, and the energy efficiency was 53.0% under the current single waste condition. At temperatures ranging from 500 to 550 ℃, 30%~60% of traditional sargentgloryvine stem medicine residue was simulated to be incorporated into the collaborative pyrolysis, which resulted in optimal material recycling efficiency and energy efficiency. The system′s energy consumption was reduced by 30%~60%, and the energy efficiency of the system increased by 3.0%~6.0%, which could provide scientific basis for the collaborative pyrolysis of Chinese medicine residue.

Authors and Affiliations

WEI Chuyun|School of Environmental Science and Engineering, Huazhong University of Science and Technology, China, ZHANG Jintai|School of Environmental Science and Engineering, Huazhong University of Science and Technology, China, LIU Guoqing|School of Environmental Science and Engineering, Huazhong University of Science and Technology, China, HUANG Zirui|School of Environmental Science and Engineering, Huazhong University of Science and Technology, China, WANG Bochun|School of Environmental Science and Engineering, Huazhong University of Science and Technology, China, YANG Haiwei|School of Environmental Science and Engineering, Huazhong University of Science and Technology, China, ZHOU Aijiao*|School of Environmental Science and Engineering, Huazhong University of Science and Technology, China

Keywords

Related Articles

Analysis and prospects of air pollution control techniques in the iron and steel industry

The iron and steel industry is a major contributor to atmospheric pollution within China′s industrial sector. Effective air pollution control in this industry is essential for reducing emissions across all industries in...

Response surface methodology to optimize the degradation of 17β-estradiol by iron nanoparticles activated peroxydisulfate

17β-estradiol (E2) is a typical endocrine disrupting compounds (EDCs) commonly found in wastewater and surface water, and is considered to cause potential environmental risks. In this paper, response surface methodology...

Research progress on thermochemical conversion technology of sewage sludge

China′s urbanization level is continuing to rise, and the annual production of municipal sludge has exceeded 70 million tons. In addition to organic components and nutrients, municipal sludge may also contain pollutants...

Experimental study on the treatment of leachate from waste transfer station using coagulation sedimentation, air floatation, ABR, AA/O, and MBR process

The waste leachate generated from the operation of waste transfer stations poses a significant environmental pollution risk due to its complex and fluctuating water quality, which contains suspended solids, oil and greas...

Experimental study on hydrogen production from wastewater and activated carbon assisted water electrolysis

Hydrogen has many advantages, such as high calorific value, low carbon, wide application, etc, which is an important strategic choice for China to achieve the dual carbon goal. It is still necessary to continue exploring...

Download PDF file
  • EP ID EP738046
  • DOI 10.20078/j.eep.20231008
  • Views 54
  • Downloads 0

How To Cite

WEI Chuyun, ZHANG Jintai, LIU Guoqing, HUANG Zirui, WANG Bochun, YANG Haiwei, ZHOU Aijiao* (2023). Analysis of material flow and energy flow in collaborative pyrolysis of Chinese medicine residue. Energy Environmental Protection, 37(6), -. https://europub.co.uk/articles/-A-738046