Analysis of the influence of the inter-wheel differentials design on the resistance of the car curved motion
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 4, Issue 7
Abstract
<p>The method and results of the analysis of the influence of the inter-wheel differentials design and the corresponding proportionality factors for the additional locking torque on the curved motion resistance of the four-wheel drive vehicle on paved roads are given. This allows choosing the most suitable designs for the parametric synthesis of the internally automated inter-wheel differential taking into account the results of studying the efficiency of different types of inter-wheel differentials under off-road conditions. Parametric optimization will allow synthesizing the internally automated inter-wheel differential, which would satisfy the requirements both to the vehicle cross-country ability and dynamics while not preventing the curved motion.</p><p>In the process of modeling, the influence of the design and parameters of the inter-wheel differentials on power consumption in the motion with the given speed and trajectory, as well as on the actual turning radius of the vehicle, was estimated.</p><p>According to the modeling results, it is concluded that it is possible to create a permanent internally automated inter-wheel differential based on differentials, in which locking degree depends on the squared difference in angular velocities of the semiaxles. For this, it is necessary to carry out optimization with respect to the proportionality factor of the locking torque, taking into account the limitations set forth in the work and using the described method of analyzing the influence of the inter-wheel differentials design on turning resistance.</p>This will allow the effective operation of military and civil four-wheel drive vehicles both in difficult road conditions and on paved roads. In addition, the process of driving will not distract the driver to control the inter-wheel differentials, and the transmission will be performed without undue design complications.
Authors and Affiliations
Dmitriy Volontsevich, Jakov Mormilo, Ievgenii Veretennikov
Keywords
Related Articles
- EP ID EP666903
- DOI 10.15587/1729-4061.2019.173968
- Views 60
- Downloads 0
Substantiation of choosing the design of a reactordust collector with two colliding flows
<p>The objects of this study are the dust collectors for dry gas purification ‒ devices in which hydrodynamic modes are implemented. Advantages of using such devices are: work with gases of high temperature, high degree...
Surface hardening and finishing of metallic products by hybrid laserultrasonic treatment
<p>Theoretical and experimental study of the possibilities of using laser heat treatment (LHT) combined with ultrasonic impact treatment (UIT) for surface hardening and finishing of metallic products was carried out. The...
Construction of methods to improve operational efficiency of an intermittent heat supply system by determining conditions to employ a standby heating mode
<p class="a">In the course of this study we defined conditions for the rational utilization of intermittent heat supply for public buildings of various types: administrative and educational institutions, and other public...
Designing a system of liquid cooling for industrial microwave installations
The paper considers the issue on ensuring a thermal regime of the magnetron's anode unit by replacing an air-cooling system with the system of liquid cooling. It has been argued that a liquid cooling system is most suita...
Assessment of capabilities of military groupings (forces) based on the functional group “Engage”
<p class="a"><span lang="EN-US">An approach to assessing the capabilities of groupings of troops (force</span><span lang="EN-US">s) based on the use of the combinatorial method with the limited base of arguments on the e...