APPLICATION OF A COMBINATION METHOD OF VEHICLE CONTROL FOR THE IMPLEMENTATION OF VEHICLE CRIP MOTION
Journal Title: Вестник Харьковского национального автомобильно-дорожного университета - Year 2016, Vol 75, Issue
Abstract
A method of vehicle straight angle motion relative its axial axis by turning the front wheels and simultaneous braking of the external side wheels is offered. An equation describing the condition of four-wheel drive vehicle crip motion is obtained.
Authors and Affiliations
M. Podryhalo, A. Boboshko, R. Kaidalov
Keywords
Related Articles
- EP ID EP238886
- DOI -
- Views 100
- Downloads 0
PERSPECTIVE DIRECTIONS OF DEVELOPING SELF-MOVING BUILDING PNEUMATIC DRIFTS FOR MAKING WELLS IN THE GROUND
The configurations of self-moving pneumatic drift with the gas lubrication for making wells in the ground and the locking mechanism to it is presented. Their advantages compared to the existing configurations are mention...
ДИАГНОСТИКА ДЕФЕКТОВ ПОДШИПНИКОВ МЕТОДАМИ НЕРАЗРУШАЮЩЕГО КОНТРОЛЯ
Как метод неразрушающего контроля рассмотрена вибродиагностика дефектов подшипников качения. Предложены общая упрощенная схема устройства для снятия сигналов вибродатчика и метод дальнейшей обработки спектрограммы, что п...
COMBINED TECHNOLOGY OF WARM ASPHALT-CONCRETE MIXTURES PRODUCTION
The basic data of the production of warm asphaltic concrete are given in the work. The main technologies for the production of warm asphalt concrete are presented. The characteristics of the main methods of bitumen modif...
THE SIMULATION OF LOAD HANDLING IN CASE OF ROPE BREAKAGE ON BRIDGE CRANES
The solution of the inverse dynamics problem to determine the type of load relative path in the vertical plane of vibrations and the influence of the Coriolis acceleration on the form of the relative trajectory of the lo...
STRESS-STRAIN BEHAVIOUR CONTROL FOR CRANE WHEELS, SHAFTS AND AXES
The article contains the research results concerning the influence of crane wheels surface hardness (diameter 710 mm, for steel 65G), shafts and axes (cross-sectional diameter 110–165 mm, material – steel 45) on the valu...