Application of Friction Welding of Weight Heavy Alloy with Wrought AlMg3 Alloy for Special Purposes
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2013, Vol 4, Issue 3
Abstract
The results of studies concerning friction welding of Weight Heavy Alloy (WHA) with AlMg3 alloy are presented. The friction welding of density 17,5 Mg/m3 with aluminum alloy showed that it is possible to reach the joints with the strength exceeding the yield strength of wrought AlMg3 alloy. This strength looks to be promising from point of view of condition which have to be fulfilled in case of armor subcaliber ammunition, where WHA rods play the role Kinetic Energy Penetrators and aluminum is used for projectile ballistic cup.
Authors and Affiliations
Olgierd GOROCH, Mieczysław KACZOROWSKI, Adam PIETRAS, Paweł SKOCZYLAS
Modal Analysis of Barrels for Assault Rifles
This paper deals with modal analysis of barrels for assault rifles. The barrels are modeled as 3-D objects. Three different barrels for analysis were used. First barrel is fully cylindrical and served as comparison to an...
Effect of Impact Angle on Penetration of Aramid and Polyethylene Internal Ballistic Panels with the Use of 7.62 mm Lead Core, Steel Jacket Projectiles
In the paper, tests results of samples of basic body armour panels are presented. The works were intended to determine the influence of projectile impact angle on the value of the ballistic limit velocity. 7.62 25 mm r...
Model wnikania pocisków uderzeniowych w metalowe przeszkody Część 1. Koncepcja modelu i przypadki szczególne
Celem i przedmiotem pracy jest pokazanie niektórych prawidłowości wnikania przeciwpancernych pocisków uderzeniowych w metalowe przeszkody (płyty) o dużej grubości i masie. Sposób rozwiązania problemu przedstawiono w dwu...
Comparison of Nonlinear and Simplified Models of Automatically Controlled Underwater Vehicle
Using time consuming calculations methods e.g. neuro-evolutionary to control of a single underwater vehicle or a team of underwater vehicles is connected with many calculations, what can make impossible receiving a solut...
Laboratory Investigations on Perforation of 30PM Steel Plates
In this study, high strength steel plates made of 30PM steel were subjected to 7.62 Armour Piercing projectiles at the ordnance velocity. Several experiments differing considerably in conditions of interaction between pr...