Application of Lattice Technology in Defect Rectification for Waterproof Board Cutting Lining Concrete at High-speed RailwayTunnel Arch
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 9
Abstract
Objective Many defects related to the lining of high -speed rail tunnels gradually become prominent with the increase of the high-speed rail construction completion years. The waterproof board cutting lining concrete is one of these serious defects. In order to reduce the structural disturbance and the above defects impact on line operation, new technologies need to be used to rectify the waterproof board cutting lining defects in the arch of high-speed rail tunnel. Method Based on a dual-line high-speed railway tunnel with a design speed of 200 km/h in southwest China, two adoptable treatment schemes (cast-in-place arch and lattice technology) after its arch waterproof board cutting the lining concrete are analyzed in detail. A comparative assessment of the safety and economy of the structure is also carried out. The construction organization, process flow, protective measures and construction effects of the defect rectification scheme using lattice technology are emphatically discussed. Result & Conclusion Compared with other schemes, the lattice technology rectification scheme makes full use of the existing structure bearing capacity, repairs the tunnel only in a local area with little impact on both the existing lining structures and the high-speed railway line operation. This scheme can significantly reduce the main stress and displacement of the structure, and make the bearing capacity of the defective lining meet the design requirements.
Authors and Affiliations
Lun GONG, Xingwang GONG, Lichuan WANG, Ming LIANG, Zhiqiang LIU, Yongjie FAN, Xuemin ZHANG
Keywords
Related Articles
- EP ID EP744351
- DOI 10.16037/j.1007-869x.2024.09.043
- Views 32
- Downloads 0
Quantitative Analysis and Allocation of Safety Integrity Level Indexes for Urban Rail Transit Vehicle System
Objective Development and application of FAO (fully automatic operation)system in urban rail transit train requires higher safety of urban rail vehicle system. Under the new operation scenario where FAO needs to be confi...
Research on Rail Transit Vehicle-wayside Multi-channel Data Transmission Methods
Objective With the increasing number of rail transit vehicles in operation, the maintenance workload for data is also increasing. The existing data landing methods have many drawbacks, necessitating research into new dat...
Research on Measurement Method of Wheel-rail Vertical Force of Urban Rail Transit
[Objective] A large number of tunnel diseases usually occur during the operation of urban rail transit, and the main cause of the diseases is the wheel-rail force. Therefore, it is necessary to study the method of measur...
Research on Switch Machine Fault Prediction Based on CHMM
Objective As an important component of urban rail transit signal equipment, once the switch machine malfunctions, the operation will be seriously affected. Monitoring and predicting its health status is particularly impo...
Contactless Traction Power Supply System Design and Efficiency Optimization of Battery Energy Storage Rail Trains
Objective Contactless power supply method, leveraging the advantages of no direct electrical contact between the primary and secondary side coils, is currently being explored in the rail transit industry. The high-power,...