Application of Taguchi Method for Optimization of Continuous Drive Friction Welding Process Parameters
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2016, Vol 2, Issue 1
Abstract
The objective of present study was to determine optimal conditions to achieve satisfactory friction welds between two dissimilar metals namely copper and carbon steel bars of same diameter. Three process parameters namely speed of rotation, axial pressure, and forge pressure were considered for the present study. Two multiple performance characteristics, considered were breaking load strength and upset. The optimization of the process parameters was done using ANOVA. The obtained results indicated that the most significant process parameters are axial pressure and rotational speed that affect the optimization of multiple performance characteristics.
Authors and Affiliations
Loveleen Kumar Bhagi, Shankar Singh, Indraj Singh
Keywords
Related Articles
- EP ID EP199980
- DOI -
- Views 119
- Downloads 0
Research of Influence of Oscillations of Tool-Part System on Roughness of Surface Layer during High-Speed Friction Strengthening
During the discontinued friction strengthening except of the high-speed friction the processes of high-frequency shock loadings appears in the tool-part contact zone. The vibrations occur in the machine elastic system. D...
Influence of the Technological Gap Value of the Tool-Joint Tapered Thread on the Drilling Mud Flow Rate in Its Screw Coupling
Tightness is one of the parameters of the quality of pipe drill string. Consequently, the reduction of hydraulic costs and wear of the tool-joint tapered thread of the drill string can be achieved by changing the cutting...
Causes of Ductility-dip Cracks Formation in IN52 and IN52 MSS Alloys during Fusion Welding
The aim of the paper is to investigate one of the causes of ductility-dip cracks (DDC) formation. The main aim of this work is calculation of grain boundaries (GB) cohesive energy in nickel based In52 and In52 MSS alloys...
Study of Surface Microstrains by Electron Speckle-Interferometry Methods
Despite the fact that speckle interferometry methods began to develop more than 30 years ago, they still remain a rather exotic laboratory tool that has not received wide practical application in tensometry measurements...
Experimental Improvement of the Technology of Cutting of High-pressure Hoses with Metal Braid on Hand Cutting Machine
In the article the review of the problem of improvement of technology of high pressure hoses cutting on the hand cutting machines is analyzed. Different methods of cutting of high pressure hoses into the billets are over...