Behavior of R.C. Slab with Opening Retrofitted by Ferrocement Overlays: Experimental and Analytical Investigation
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 5
Abstract
This paper presents an experimental and numerical study to evaluate the effectiveness and feasibility of using ferrocement as external overlays for strengthening R.C. slab with a central opening. Twelve R.C slabs of dimension 1000 x 800 x 100 mm were cast and tested experimentally, ten of the specimens were strengthened by ferrocement laminates and the other two were kept as control specimens; with and without opening. The effects of mortar thickness, number, and type of steel wire mesh, ferrocement mortar strength, and strengthening schemes were investigated. A 3-D finite element model using ANSYS package was developed and compared with the available experimental test results to check the validity of the model. A total of 32 numerical models were analyzed to study the different parameters that not covered by the experimental investigation. This study provides information on the viability of using ferrocement laminates in strengthening R.C. slab with cut-out and showed that both flexural behavior and stiffness were significantly enhanced. It was observed that the influence of the openings is vanished by strengthening the test specimens by ferrocement. The ultimate load capacities of the strengthened specimens were increased between 186% and 80% relative to the control specimens with and without opening respectively. The finite element analysis was capable of reasonably estimate the experimental behavior.
Authors and Affiliations
Mahmoud Elsayed, Alaa Elsayed, Samah Badawy
Upgraded the Performance of the Fortifying R.C. beam by CFRP In Flexural
The use of carbon fiber fortified polymer (CFRP) has been comprehensively utilized for the reinforcing of concrete structures. Some development organizations utilize CFRP in flexural fortifying of reinforced concrete bea...
The Application of Lean-Six-Sigma Methodology in the Manufacturing Sector: A Case Study of Nigerian Breweries
This research on application of lean six sigma methodology in the manufacturing company was carried out in the Nigerian Breweries at Enugu. Nigerian Breweries was selected for the study because it has many production lin...
Design and Development of an Innovative Hubless Wheel
the aim of this project is to design and build an innovative hubless wheel. The hubless wheel will be self driven by a prime mover like a DC motor. The wheel will have three planetary rollers which will be powered by two...
CFD Analysis of Air Intake Manifold System to Improve Efficiency of Formula SAE Car
This research paper aims at designing and developing an air intake manifold to be used in FSAE competitions. According to the rule imposed by the FSAE committee, a 20 mm restrictor should be a part of the intake manifold...
Dispute Management Between Project Management Consultant And Civil Contractor
To manage the various kinds of construction projects, it requires how to deal with organizations. The Project management consultants has characteristic of Knowledge, Performance & Inter-personal Skills. The purpose of th...