Biodiesel Performance within Internal Combustion Engine Fuel System - A Review
Journal Title: Tribology in Industry - Year 2016, Vol 38, Issue 2
Abstract
This review paper highlights the tribological performance of biodiesel at contacting surfaces in the fuel delivery system of compression ignition (diesel) engines. The focus is on the injection components that include low and high pressure injection pumps, diesel fuel injectors, electro-hydraulic valves, diesel fuel lubricity measurements and effects of biodiesel on the running conditions in a diesel fuel injection system. The common rail system and the distributor pump injection systems with electronic diesel control are among the modern trends that are specifically highlighted. Boundary, mixed and hydrodynamic lubrication regimes together with lubricant oil film thickness, pressure and engine performance are also considered.
Authors and Affiliations
Z. A. Khan , A. Saeed , O. Gregory , A. Ghafoor
Keywords
Related Articles
- EP ID EP143940
- DOI -
- Views 92
- Downloads 0
The Effect of Compression Ring Profile on the Friction Force in an Internal Combustion Engine
In an internal combustion engine piston, piston ring and cylinder are the most important assembly for transmitting the forces produced by the combustion process. The friction between piston ring pack and cylinder account...
Tribological Coatings for Aerospace Applications and the Case of Wc-Co Plasma Spray Coatings
Friction and wear requirements in aerospace systems are dictated by life limiting problems. One challenge is the broad range of contact stresses and sliding speeds for various movable devices. Another challenge is the ex...
Contact Stress Generation on the UHMWPE Tibial Insert
Total knee replacement (TKR) is considered, during last years, as a very successful surgical technique for removing knee joint deformities and eliminating pain caused by cartilage damage. In literature, as primary causes...
Increasing Tribo Unit Wear Resistance with the Ion-Plasma Coating
The mode and parameters of applying an ion-plasma coating to the surface of the working bodies are established. The thickness of the ion-plasma coating on the surface of the excavating parts is specified. It is found tha...
Dynamics and Lubrication Problem Analysis of Main Bearings for IC Engines Based on Coupling between a Crankshaft and a Flexible Whole Engine Block
The article presents the solution to the interconnected problem of main bearings dynamics for the forced internal combustion (IC) engine. For the crankshaft main bearings system of the (IC) engines it is necessary to con...