BOILER OPERATING HAZARD – ELECTRICAL PROPERTIES OF SELECTED FUELS ASH
Journal Title: Proceedings of Electrotechnical Institute Prace Instytutu Elektrotechniki - Year 2012, Vol 59, Issue 259
Abstract
The study of fuel ash is of great importent in the analisis processes in the light of combustion efficiency, pollution, economic use of the boiler and the wear process. To test the electrical characteristics of ash depended on the structure and microstructure of ash and are associated with the sintering temperature. The paper presents the results of impedance analysis in terms of finding a substitute materials, the electric model which is the ash, and the relationship of individual elements of this model with the characteristic temperature sintering. The proposed model was tested by computer simulation and determined the parameters of this model were correlated.
Authors and Affiliations
Tomasz JANICZEK
Keywords
Related Articles
- EP ID EP187656
- DOI -
- Views 41
- Downloads 0
EQUIVALENT CIRCUIT OF A WINDING WITH A MAGNETIC CORE
An equivalent circuit of the winding that is based on the magnetic core circuit has been proposed. The obtained inductance matrix with consideration of the capacitance one leads to the winding model that enables to deter...
THE DESTRUCTIVE EFFECTS OF UV RADIATION WITH DIFFERENT SPECTRAL SUB-BANDS IN OPTICAL MATERIALS
The paper presents results of experimental work carried out to investigate the impact of destructive processes in UV optical materials from each sub-spectrum (UVA, UVB and UVC). Examined and analyzed the changes in time...
ANALYSIS OF THE INFLUENCE OF A POWER INDUCTANCE ON THE OPERATION OF A BRIDGE RECTIFIER
A full-wave bridge rectifier is one of the most often used non-linear load. A main area of its using are single-phase power suppliers which are a part of the most of electronic devices. The power consumption of these dev...
LI-ION BATTERY CHARGER POWERED FROM PV MODULES FOR ELECTRICAL VEHICLES
This paper presents a description of the lithium-ion battery charger powered by photovoltaic modules for electric vehicles. Working principles of the charger, its control algorithm and experimental results are presented.
AUXILIARY POWER CONVERTER WITH 3-LEVEL NPC STRUCTURE FOR RAILWAY APPLICATIONS – SIMULATION AND EXPERIMENTAL RESULTS
The paper presents AC/DC/AC converter with galvanic isolation of NPC (Neutral Point Clamped) multilevel structures. Selected simulation and experimental results of 3-level AC/DC/AC converter are presented.