活性碳纤维表面硝酸-铁(Ⅲ)改性<br /> 对乳酸菌固定化的影响<br />
Journal Title: Science Paper Online - Year 2009, Vol 4, Issue 5
Abstract
采用HCl、H2SO4、HNO3和FeCl3溶液分别对活性碳纤维进行表面改性，考查改性前后活性碳纤维表面酸性含氧官能团和表面元素含量变化，以及作为乳酸菌固定化载体的单丝菌膜生长情况。结果表明：经HNO3和H2SO4改性后，活性碳纤维表面酸性含氧官能团量随反应时间增加，5 h后增加速度缓慢，并负载有相应的N和S等元素;单丝吸附乳酸菌膜厚度随表面O和N元素含量增加而增大。经浓HNO3改性5 h再经0.1 mol/L FeCl3改性4 h后，活性碳纤维表面负载的Fe(Ⅲ)含量为0.156 3 mol/kg，单丝乳酸菌膜厚度可达40 μm，经HNO3-Fe(Ⅲ)改性后的活性碳纤维用于淀粉生产工业废水制备乳酸试验，使得发酵周期缩短约8 h，乳酸产率提高2.8%。
Authors and Affiliations
Chenyong Huang , Peng Wang , Wei Xu, Guoda Chi
Keywords
Related Articles
- EP ID EP96849
- DOI -
- Views 124
- Downloads 0
The design of USB2.0 interface module based on FX2LP
A USB2.0 interface module is introduced in this paper, which provides a high speed data path between host and peripherals. The chip EZUSB-FX2LP is used in this work, and the inner structure and features of FX2LP are pres...
Comparison of dehumidification performance of two liquid desiccants
The dehumidification performance of LiBr aqueous solution and LiCl aqueous solution was tested in packed-bed dehumidifier. A series of experimental dehumidification data of the two desiccants were obtained and two experi...
多孔分散微结构混合器中流动及其<br /> 混合性能的CFD模拟<br />
在对多孔分散微结构混合器内流动现象进行分析的基础上，选择标准的k-ε模型和多环境模型，以商业CFX软件为基本工具，建立了模拟多孔分散微结构混合器的几何模型，对于孔半径为10，20，30，50，70 μm的微结构混合器内的流动、混合性能进行...
Transformer fault diagnosis based on relative losses<br /> of negative sequence power <br />
With the own losses of negative sequence power of transformers，this paper introduces a new characteristics of transformer fault diagnosis based on the relative ratio losses of the negative sequence power. Through theore...
Sensitivity analysis and applied research on topology optimization based on element-free Galerkin method
To prevent numerical instabilities occurring in the conventional topology optimization, we present a model of structural topology optimization based on the element-free Galerkin method (EFG), in which the relative densit...