Calculation of design heat loading of building heating systems by european and domestic methods
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2017, Vol 1, Issue 69
Abstract
On the example of the residential building with a heated basement floor in Rivne, the design heat load of heating system was calculated using national standard SNiP 2.04.05-91 * and according to European standard EN 12831 using program Audytor OZC 6.1. The calculation results of all components of the design heat transmission losses for heating spaces through all building envelopes are analyzed: from the heated space to the exterior through the building envelope, from the heated space to the exterior through the neighbouring heated spaces, from the heated space to the exterior through the unheated space and from the heated space to the ground. The values of ventilation heat losses calculations were also analyzed. The design heat load of the heaters and the design heat load of the building with heated and unheated basement are calculated and analyzed. Calculation results of the design heat load of the building heating systems computed by SNiP 2.04.05-91 * and EN 12831 are close enough. The results of computations substantially depend on the chosen method and the calculation parameters.
Authors and Affiliations
S. B. Protsenko, O. S. Novytska, V. P. Kovalchuk
Isoparametric analysis when studying composite materials
Presented is the method to analyse the variations in characteristics of composite materials under effects of composition-process factors in conditions when the factors must provide the unvarying level of one of the chara...
Coverings for ensuring the movement of individual environmental transport
This article analyzes the state and development of bicycle lanes infrastructure in European countries. Comparative data on the load of bicycle transport in some countries of the world are given in the work (number of bic...
The temperature limitations for cargo vehicles on Ukraine's motorways
In time of summer heat the temperature of road surface chemise can exceed bitum softening point. In this case cargo vehicles’ intensive current traffic results in road’s tearing away and rutting. During cold time the roa...
Review of the new state building codes and standards for engineering protection of territories, buildings and constructions from dangerous geological processes in complex engineering-geological conditions
The article provides an overview of the new state building codes (SBC) and standards (GOST) developed at the State Research Institute of Building Constructions (Kyiv, Ukraine). The norms regulate mandatory requirements t...
Effects of the chemical waste production on the peculiarities of the polymerconcrete
A number of researches have been done to identify the cheapest materials and those ones, which are able to perform functions of binders in mortars and concretes effectively. Such materials are wastes of chemical industri...