Carbon-Silica Composites with Cellulose Acetate, Polyisocyanate and Copper Chloride
Journal Title: Фізика і хімія твердого тіла - Year 2016, Vol 17, Issue 3
Abstract
Cellulose acetate and polyisocyanate copolymer synthesized by simultaneous mixing of cellulose acetate and polyisocyanate with acetone solution of Copper chloride and fumed silicon dioxide was carbonized in a silicon dioxide template. The composite structure and composition was studied with SEM, EDS and XRD. It was shown that the porous carbonaceous nanomaterial was synthesized where formed carbon was represented by coating on silicon dioxide and consisted of graphite, graphene and amorphous nonstructured carbon. Crystals of metallic copper with the size up to few µm were formed from Copper chloride after reduction of Cu<sup>2+</sup> with products of organic compounds pyrolisis.
Authors and Affiliations
V. V. Goncharuk, V. M. Ogenko, L. V. Dubrovina, D. D. Kucheruk, O. V. Naboka, I. V. Dubrovin
Keywords
Related Articles
- EP ID EP248825
- DOI 10.15330/pcss.17.3.407-411
- Views 80
- Downloads 0
Analysis of Capacity and Phase Composition of Chromotitanazing Surface
The article deals with the investigation of phase composition and capacity of chromotitanazing surface of steel of 25X5MA. Components made of steel with the coatings applied ШХ-15 and 12XH3A were taken as comparison. Abs...
Interaction and Optical Properties of Specimens in Sb2S3 - Ge System
General character of interaction of Sb2S3 with elemental Germanium resulting in formation of the glass - manocrystal composite is established. Sufficient shift of the borders of optical transparency domain of the composi...
Investigation of structural, energy state and kinetic characteristics of RNiSb semiconductor (R = Gd, Lu)
The features of structural, energy state and kinetic characteristics of the p-GdNiSb and p-LuNiSb semiconductors were investigated in the temperature range T = 4.2-400 K. As example, in p-LuNiSb, the generating of struct...
Ignition and Self-Supporting Burning of Gas-Air Mixtures with Hydrogen Admixtures on Platinum Wire
The proposed work describes analytical identification of hydrogen admixture concentration and catalyst temperatures limit values beyond which catalytic flameless steady combustion of gas-air mixtures at ambient temperatu...
Engineering of Point Defects and Formation Mechanisms of PbTe–CdTe Solid Solutions
The crystal-quasichemical formulas were proposed in paper. There were obtain the dominant point defects of Pb<sub>1-x</sub>Cd<sub>x</sub>Те solid solutions on the base of initial binary solutions PbТе and CdTe of the n-...