Case Study regarding the test of the new screw compressor with high delivery pressure - 45 bara - on the test bench (with air)
Journal Title: INCAS BULLETIN - Year 2012, Vol 4, Issue 4
Abstract
Screw compressors, which are part of positive displacement compressors, can find an increasing use in gas industry and beyond due to their advantages. Maximal parameters of these devices, done by Comoti under GHH-Rand license stop at a maximum flow of 3000 Nm3/hour and 26 bara discharge pressure. The needs of potential beneficiaries have imposed the necessity to design and manufacture a new family of screw compressors and oil injection able to develop a discharge pressure of 45 bara with flow rates up to 5000 Nm3/hour. This paper presents the design and experimental test phases – for the first screw compressor with discharge of pressure up to 45 bara – CU90 HP. Continue research and development have allowed to this type of screw-compressor – to find a market position, diversifying its size range in the last decade in a manner more explosive, if we refer to other types of compressors.
Authors and Affiliations
Marian NIŢULESCU, Cristian SLUJITORU, Valentin PETRESCU
Keywords
Related Articles
- EP ID EP140693
- DOI 10.13111/2066-8201.2012.4.4.14
- Views 90
- Downloads 0
Control of uncertain systems by feedback linearization with neural networks augmentation. Part I. Controller design
The paper highlights the main steps of adaptive output feedback control for non-affine uncertain systems – both in parameters and dynamics – having a known relative degree. Given a reference model, the objective is to de...
Wave-wave regular interactions of a gasdynamic type
Two gas dynamic analytic approaches [of a Burnat type / Martin type] are respectively used in order to construct two analogous and significant pairs of classes of solutions [isentropic pair / anisentropic (of a particula...
Flutter analysis of the IAR 99 SOIM aircraft
Flutter analysis is considered for the minimum altitude at which the minimum designed Mach number is achieved, for the maximum altitude at which the maximum designed dynamic pressure is obtained and for the minimum altit...
On the design of squeeze film dampers operating within the limits of the Reynolds theory
Squeeze film dampers (SFD) are used to control the shaft dynamics in rotating machinery; SFD are essentially thin oil films installed around the ball bearing housing (or even ball bearings outer races) to lower the stiff...
New Methodology for Optimal Flight Control using Differential Evolution Algorithms applied on the Cessna Citation X Business Aircraft – Part 2. Validation on Aircraft Research Flight Level D Simulator
In this paper the Cessna Citation X clearance criteria were evaluated for a new Flight Controller. The Flight Control Law were optimized and designed for the Cessna Citation X flight envelope by combining the Deferential...