CFD Approach for Off-Design Efficiency Improvement of Double Suction Centrifugal Pump

Abstract

The energy consumed by a large pump to transport the water has a dominant role in pumping system and hence the efficiency of the pump is of great concern to both manufacturer and customer in large size pumps. The pumps mostly operate at off-design conditions and hence at lower performance. A little improvement in the efficiency of pump will save huge amount of energy and money. In order to improve performance of double suction centrifugal pump, especially at off-design conditions, systematic and validated computational fluid dynamics (CFD) approach had been used to assess the flow behavior in suction casing, impeller and delivery casing of an existing pump for identification of geometrical locations for performance improvement. The head losses and flow pattern in the individual part of the pump were studied and identified the locations for performance improvement and accordingly, the geometry of pump components and surface roughness were modified. There was an increase of normalized head and efficiency by 4.5% and 3.1% respectively at duty point as compared to the CFD results of existing pump. The substantial increase in head and efficiency was also achieved at off-design conditions for both existing and smooth surfaces.

Authors and Affiliations

Shyam Narayan Shukla, Ruchi Khare, Vishnu Prasad

Keywords

Related Articles

Execution of Cryogenically Treated Brisk Steel Enters in Exhausting of Austenitic Solidified Steels

Within this Evaluation, Implementation of cryogenically treated M35 Lively steel (HSS) In depleting of turn moves 316 tempered steels and AISI 304 was evaluated surface, regarding drive control Disagreeableness mechanica...

Improve Gasoline Octane Number and Studying Reid Vapor Pressure Effect and Calorific Value by using Environmental Additives

An assessment for the addition of DO and DOA on the octane number and Reid vapor pressure (RVP) of gasoline with different chemical compositions. The locally produced gasoline was blended with three different ratios (v/v...

Eign-Limits Uncertainty Methodology for Temperature Calibration by Fixed Points and Comparison

Calibration measurement uncertainty of Platinum Resistance Thermometer (PRT) was estimated in International Temperature Scale 1990 (ITS-90) at defined fixed points [1]but it was not gives a criteria to find the uncertain...

A COMPREHENSIVE ASSESSMENT OF SMALL HYDRO POWER IN INDIA – CURRENT SCENARIO AND FUTURE POTENTIAL

India is fortunate to have enormous hydro-electric power, standing fifth in the global market with regard to exploitable hydro-potential. For employment of rural communities and to reduce global warming, small hydropower...

Fabrication of Aluminium 6061- SiC-Al2O3 MMC and HMMC by Strir Casting Technique and Comparing the Mechanical Properties

Aluminum alloys are extensively used in aerospace and automobile industries owing to their low density and good mechanical properties, superior corrosion resistance and wear, low thermal coefficient of expansion as compa...

Download PDF file
  • EP ID EP245164
  • DOI -
  • Views 64
  • Downloads 0

How To Cite

Shyam Narayan Shukla, Ruchi Khare, Vishnu Prasad (2017). CFD Approach for Off-Design Efficiency Improvement of Double Suction Centrifugal Pump. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ), 7(5), 289-300. https://europub.co.uk/articles/-A-245164