Characterization and Degradation of Viton Fuel Hose Exposed to Blended Diesel and Waste Cooking Oil Biodiesel
Journal Title: Журнал інженерних наук - Year 2018, Vol 5, Issue 2
Abstract
Degradation and material incompatibility between biodiesel and fuel system are the major concern associated with the adoption of biodiesel. In this research, effects of different mixture of waste cooking oil biodiesel/diesel blends (B10, B20 and B40) were investigated on the basic fuel properties such as density, kinematic viscosity (KV), flash point (FP), pour point (PP), cloud point (PP), freezing point (FRP) and sulphur content (SC). Viton fuel hose exposed to different fuel of types and their degradation characteristics, total acid number and change in the surface morphology were studied. It was found that density, KV, FP, FRP, CP and PP increased while SC decreased with increasing biodiesel content in the blends. The biodiesel concentration was noticed to affect the properties of elastomers, causing swelling of Viton fuel hose. The exposure of Viton fuel hose to fuel types of increasing biodiesel content led to reductions in tensile strength, harness and compressive strength.
Authors and Affiliations
O. D. Samuel, I. Emovon, F. I. Idubor, O. Adekomaya
Numerical Simulation of the Evaporative Air Cooler with a Capillary-Porous Structure
Application of evaporative air cooling in various technologies allows reducing energy costs for improving environmental performance. Considering the promise of using air coolers with a capillary-porous structure, a mathe...
The hypothesis of formation of the structure of surfaced metal at the surfacing based on the application of the prognostic algorithm of control the electrode wire speed
The growth of a drop in the process of surfacing by a consumable electrode is characterized by a linear dependence of the current change on time. A hypothesis has been put forward, according to which a reduction in the f...
Optimum Choice of the Front Suspension of an Automobile
The paper details the optimum choice of the front suspension of an automobile. The influence of suspension on the steering geometry is studied by considering the various combinations of joints at the four-bar mechanism o...
The decrease in technogenic load on the environment during the process of absorption of ammonia in soda industry
The article studies the effectiveness of implementation of existing equipment of soda production absorbers for ammonia cleaning from gas emissions. It identifies the major sources of ammonia emissions in the soda ash pro...
Adjusting the size of the rope thread in the machining of dimensional tool
The article considers the possibility of adjustment the geometrical deviations profile rope thread with a large pitch, which appear as a consequence of wear of the cutting tool during machining. Due to the fact that the...