Chemical Polishig of CdTe and Solid Solution ZnxCd1-xTe and Cd0.2Hg0.8Te by the HNO3– НІ – Glycerin Acid Aqueous Solutions
Journal Title: Фізика і хімія твердого тіла - Year 2017, Vol 18, Issue 1
Abstract
The chemical dissolution of the CdTe, ZnxCd1-xTe and Cd0.2Hg0.8 solid solutions single crystals in the HNO3 – HI – glycerin aqueous solutions has been investigated. The etching rate dependences of the mentioned above materials versus the iodine and organic content in the compositions and the kinetic peculiarities of the chemical dissolution have been determined. It was established that the dissolution rate of the semiconductor solid solutions in the HNO3 – HI – glycerin etchant compositions decreases with the increasing of oxidizer and glycerin. Using experimental data, the compositions of polishing solutions and the conditions of chemical-dynamic polishing of the CdTe, ZnxCd1-xTe and Cd0.2Hg0.8Te surfaces have been optimized.
Authors and Affiliations
E. E. Hvozdiyevskyi, R. O. Denysyuk, V. M. Tomashyk, Z. F. Tomashyk
Keywords
Related Articles
- EP ID EP263689
- DOI 10.15330/pcss.18.1.117-121
- Views 26
- Downloads 0
The Influence of Nanodispersed Silver/Alumina Addition on the Rheological Properties of Melts and Phase Transitions in Polypropylene/Copolyamide Blends
There is concentration influence of nanodispersed silver/alumina addition combined on appropriatenesses of polypropylene/copoliamide mixture melt flow studied. There are dependences of swelling and viscosity from Ag/Al2O...
Chemical and Mechanical Polishing of Cd1-xMnxTe by Solutions Based on H2O2–HI–Citric Acid
UThe process of chemical and mechanical polishing CdTe and Cd1-xMnxTe (0.3 <x <0.5) solid solutions by the solutions HI–H2O2–citric acid has been established. There is investigated the influence of the nature of the visc...
Graded-Gap Technology Formatting of High-Speed GaAs – Transistor Structures as the Basis for Modern of Large Integrated Circuits
Reducing the size of silicon devices is accompanied by an increase in the effective rate of electrons, decrease transit time and the transition to a ballistic work. Power consumption is reduced too. Formation of large in...
Polymorphic Transition of PbO, Initiated by Curing Conditions of Mesocomposites Under Action of Constant Physical Fields
Influence of physical-chemical factors at forming three-dimension network of thermosetting plastic in simulations action of constant physical field upon capable to polymorphic transition crystalline ((form of PbO first s...
Diagnostics of Ferrogarnet Films Magnetization
The problem of measuring the static magnetic parameters of epitaxial ferrogarnet films was discussed. It is shown that the characteristics of the geometry of ferrite epitaxial structures require changes in the allocation...