COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
Journal Title: Електротехніка і Електромеханіка - Year 2015, Vol 0, Issue 5
Abstract
Purpose. To find the analytical expressions of determining the optimum geometric dimensions by criteria of the losses minimum of axial field squirrel-cage induction motors and to compare traditional and axial field motors. Methodology. We have applied the method of the relative indications of the technical level with relative controlled variables. We have used the approximation of the experimental dependence of the distribution of the induction in the air gap and the integral averaging of the magnetic flux. Results. We have developed the mathematical model for determining the optimum geometric dimensions by criteria of the losses minimum of the active part of axial field squirrel-cage induction motors taking into account the radial distribution of the induction in the air gap and teeth. We have considered the comparative analysis of the indications of active power losses of traditional and axial designs of electromagnetic equivalent motors. Originality. For the first time we have created the mathematical model of the active power losses of the active part of axial field squirrel-cage induction motors with the uneven distribution of the magnetic flux in the core and investigated the effect of the geometric relationships on the energy efficiency of axial field motors. Practical value. Based on the superior parametric compatibility and the high energy efficiency of axial motors the expediency of replacing traditional induction motors to axial field induction motors has been proved in the special drives, which operates in continuous duty. Also obtained by simulation optimal geometric relationships of the magnetic circuit can be used in the manufacture and design of axial motors by criteria of the losses minimum.
Authors and Affiliations
А. А. Stavinskii, О. О. Palchykov
Keywords
Related Articles
- EP ID EP298235
- DOI 10.20998/2074-272X.2015.5.04
- Views 80
- Downloads 0
PROFESSOR P.P. KOPNIAIEV – SCIENTIST, PUBLIC PERSON, ESTABLISHER OF HIGHER ELECTRICAL ENGINEERING EDUCATION (to the 150th anniversary of his birth)
Purpose. To carry out complete historical and scientific analysis of Professor P.P. Kopniaiev's activities and establish his role and place of achievements in the formation of the basic concepts and directions of the the...
SOME FEATURES OF DYNAMIC CHARACTERISTICS OF BUMPERS WITH PERMANENT MAGNETS
This article describes the features of the dynamics of the bumper with permanent magnets. Pictures of the magnetic field in 3D are presented, transients are calculated. It is shown that operation of this system depends o...
NEURAL NETWORK MODELING IN PROBLEMS OF ELECTRICAL GRIDS MODES PREDICTION
Purpose. Forming a neuro-fuzzy network based on temperature monitoring of overhead transmission line for the prediction modes of the electrical network. Methodology. To predict the load capacity of the overhead line arch...
CORRELATION BETWEEN ELECTRICAL AND MECHANICAL CHARACTERISTICS OF CABLES WITH RADIATION-MODIFIED INSULATION ON THE BASIS OF A HALOGEN-FREE POLYMER COMPOSITION
Introduction. The high saturation of the cable routes of nuclear and thermal stations, wind parks and solar power plants, on-board systems imposes stringent requirements in the field of fire safety of cables, which makes...
A TECHNIQUE OF MEASURING OF RESISTANCE OF A GROUNDING DEVICE
Introduction. Measurement of resistance of the grounding device (GD) by means of a three-electrode system. This requires not only the right choice of installation locations of measuring electrodes, but also the determina...