COMPARATIVE ANALYSIS OF ANALYTICAL AND NUMERICAL CALCULATIONS OF CONTACT STRESSES AT ROTATIONAL ELEMENTS OF GEROTOR PUMPS
Journal Title: Applied Engineering Letters - Year 2016, Vol 1, Issue 1
Abstract
This paper presents a wear process analysis of piston-cylinder set in internal combustion engines.Piston mechanism is a very important factor in the proper lubrication of the engine, but also a potential cause of increased consumption of oil. There are very important kinematic - tribological properties of piston mechanisms in this regard. From the point of reliability and functionality, critical parts of this circuit are the piston rings. Wear is most pronounced in the first piston ring, since it is exposed to the highest pressure and temperature, as well as the direct impact of fuel and combustion products. The intensity of wear of piston - cylinder set depends on many factors, but the most influential ones are: construction, materials used for the production of the parts of this assembly, production technology and conditions of use
Authors and Affiliations
L. Ivanovic, B. Rakic, M. Matejic
Keywords
Related Articles
- EP ID EP211870
- DOI -
- Views 111
- Downloads 0
EXPERIMENTS ON THE DEPHOSPHORIZATLON OF HIGHLY ALLIED MANGANESE STEEL WITH HIGH PHOSPHORUS
The practical application of dephosphorization is discussed in the paper. Using the method of austenitic manganese steel waste re-melting, we get inevitable, phosphorus contents that exceed the admissible limits. The pho...
THE STRUCTURAL SOLUTIONS OF THE TIMBER ROOFS: JOINTS AND JOINING PLATES
In the article the authors present the practical design solutions regarding to structural timber roofs, especially the carpentry joints. The selected factors and parameters which should be respected during the correct st...
DESIGN OF WATER HAMMER CONTROL STRATEGIES IN HYDROPOWER PLANTS
Hydropower plants play an important role in the growth of the renewable energy sector. The main objective of the paper is to present, discuss and assess critical parameters which may cause unacceptable water hammer loads...
COMPARISON OF HEAT EXCHANGERS ACCORDING TO THE SHAPE OF RIBS
In this paper the lamella heat exchangers were presented. They are used for water and air as operating mediums, and can be differentiated by the shape of the ribs. The one has sinuous type of ribs, while the other one ...
NUMERICAL INVESTIGATION OF COUNTER-ROTATING VORTICAL GUST IMPINGEMENT EFFECT ON A ROTATING CYLINDER
The influence of a counter-rotating vortical gust pair is numerically investigated on a streamlined laminar flow and forced convection heat transfer around a steadily rotating two-dimensional circular cylinder. Reynolds...