Comparative Modeling on Surface Roughness for Roller Burnishing Process using Fuzzy Logic
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Roller burnishing is one of the surface finishing processes without removing of a material, where a roller rolls over the machined surface under high pressure and flattens, the roughness peaks into valley. It will improve surface finish, as well as enforces favorable compressive residual stresses and raises hardness in functional surfaces. Aluminium alloys find attractive alternate for high strength applications. In this experimental work, burnishing operation is carried out on various Aluminium alloys, such as Al 2014 and Al 6063 using different burnishing parameters, such as cutting speed, feed, no of passes and depth of cut using burnishing tool. Through this experimental work, parameter that affects the surface roughness and surface hardness, on Al 2014 and 6063 material was identified and its influence on these responses was discussed. Also, the studies include the application one of the machine learning techniques is fuzzy logic, in the aspects of modeling and optimization of various process parameters applied, with roller burnishing process. This would give the comprehensive idea on choosing an optimum burnishing condition
Authors and Affiliations
P. SENTHIL KUMAR, B. SRIDHAR BABU, V. SUGUMARAN
Keywords
Related Articles
- EP ID EP278677
- DOI 10.24247/ijmperdfeb20186
- Views 90
- Downloads 0
Optimisation of WEDM Parameters Using Taguchi Method and Fuzzy Logic Technique for Al-6351
Optimization is one of the techniques used in the manufacturing sector to achieve best operating conditions, which is essential for industries to provide quality stuff at subordinate outlay. This paper aims investigation...
Stepper Motor Actuator for HVAC Blend Door – A Review
duct has the heater core mounted on the evaporator core. The temperature of the air depends on the amount of mixing of the air, which passes through the heating core and then through the evaporator. The passage of air th...
Analytical Solution to MHD Flow and Heat Transfer of Visco-Elastic Fluid Over an Exponentially Stretching Sheet in Porous Media with Viscous Dissipation
In this paper, we study the heat transfer of MHD visco-elastic fluid flow through porous medium over an exponentially stretching sheet with viscous dissipation. By using suitable similarity transformations the governing...
Design of Low Cost Semi-Automatic Dry Ironing Machine for Laundries
In most of the laundries, manual ironing machine is used. This leads to more efforts for the ironing process as this manual ironing machine is designed for low utilization (i.e. ironing of few clothes). The manual work i...
ANALYSIS OF INCREMENTAL SHEET FORMING PROCESS THROUGH SIMULATION
Incremental sheet forming (ISF) process is a flexible manufacturing process to produce complex 3D products at reasonable manufacturing cost. An advantage of ISF is the improved formability than traditional sheet forming...