Comparative Study of Various Types of Dampers used for Multi-Story R.C.C. Building

Abstract

dampers are used to resist lateral forces coming on the structure. Dampers are the energy dissipating devices which also resist displacement of rc building during earthquake. These dampers help the structure to reduce the buckling of columns and beams and the stiffness of the structure is increased. At the time of earthquake multi-storey building is damaged and large deformation occurred in multi-storey building. Dampers reduce vibration and deformation of rc building during earthquake. There is lot of various types are used in rc building. This study .deals with selection of suitable type of damper which will be more resistant to earthquake for the selected building. The dissertation work is concerned with the comparative study of various types of dampers used for multi-storey r.c.c. Building. Response spectrum method is used to analyse seismic behavior of g+7 storey building with and without dampers. In response spectrum method, earthquake load is applied in both x and y direction. For the analysis purpose etabs 2015 software is used by considering seismic zone iv as per is 1893:2002(part 1) code. Results of these analyses are discussed in terms of various parameters such as maximum absolute displacement, absolute acceleration, absolute velocity, storey shear, storey drift. The comparison of these various parameters is done. The structure is analyzed with and without various types of dampers. Results of these analyses are discussed in terms of various parameters such as maximum absolute displacement, absolute acceleration, storey shear, storey drift. The comparison of these various parameters is done. From these comparison it is concluded that maximum absolute displacement, absolute acceleration, storey shear, storey drift values are more in case of rc building without damper as compared to rc building with dampers.

Authors and Affiliations

M. S. Landge, Prof. P. K. Joshi

Keywords

Related Articles

Bandwidth Improvement of Slotted Patch Antenna Using Pin Short

FR4 is an inexpensive and easily available substrate material, which can be used to design efficient and cost effective microstrip patch antenna. This paper focuses on increasing the bandwidth of the microstrip patch an...

Repercussion of Nano silica on M40 Grade Concrete

Nano innovation is most encouraging region of science. Distinctive nano materials like nano silica, nano titanium oxide, carbon nano tube and so on are presently a days utilized by the engineers in development work. Thi...

Fixed Point Results in Quasimetric Spaces

In the setting of quasimetric spaces, we prove some new results on the existence of fixed points for contractive type maps with respect to Q-function. Our results either improve or generalize many known results in the l...

Evasive Security Using ACLs on Threads Using firewall-like rules to prevent malware

This document describes a new architecture for security systems, which greatly improves system performance and at the same time enforces veritable security to it. Conventional anti-virus systems that exist in the market...

Electrical Generation by using Vertical Axis Wind Turbine

Wind power capacity has experienced tremendous growth in the past decade. There are many loads (such as remote villages, islands, ships etc.) that are away from the main grid. Energy demand continues to grow, year after...

Download PDF file
  • EP ID EP23820
  • DOI http://doi.org/10.22214/ijraset.2017.4114
  • Views 304
  • Downloads 8

How To Cite

M. S. Landge, Prof. P. K. Joshi (2017). Comparative Study of Various Types of Dampers used for Multi-Story R.C.C. Building. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 5(4), -. https://europub.co.uk/articles/-A-23820