Comparison of 3D Printed Gear’s Geometrical Characteristics
Journal Title: Machine Design - Year 2018, Vol 10, Issue 1
Abstract
A study of the influence of extruded material type and layer thickness on the surface roughness and the geometry accuracy on a 3D printed gear tooth profile is presented in this paper. A whole set of samples with the same geometric characteristics is printed from two types of materials (PLA and ABS plastic) and with different layer thickness: 0.1; 0.2; and 0.3 mm. The results of roughness testing and uniformity of the layer thickness are presented in this paper. By comparing the results of samples testing from PLA and ABS plastics with the same 3D printing parameters, a certain conclusions are presented at the end of the paper.
Authors and Affiliations
Žarko Mišković, Radivoje M. Mitrović, Zoran Stamenić, Aleksandar Dimić, Jan Danko, Jozef Bucha, Tomas Milesich
Keywords
Related Articles
- EP ID EP485610
- DOI 10.24867/MD.10.2018.1.1-6
- Views 120
- Downloads 0
Influence Analysis of Selected Turbine to Working Characteristics of Small Hydro Power Plants
Small Hydro Power Plants (SHPPs) represent a very important renewable energy source and is becoming more and more expensive in the world. Unfortunately, this is not the case in our country. The choice of turbine SHPP is...
Research Correlation Vegetation Index of Corn with Speed of Movement Sensor and Elevation of Field
This paper presents field scouting of corn in order to determine the content of nitrogen in the green parts of the plants. The aim was to measure the vegetative index using two optical sensors by OptRx AGL Technology. Th...
Spur Gear Design Streamlined
A design approach is presented that synthesizes spur gear design theory and practice into a coherent and systematic method. Simplification is achieved through reformulation of stress capacity models which is based on the...
Simulation of Robot RV-2AJ Using Softwares Solidworks and NI LabVIEW
In this paper, the attention is given to the simulation of the industrial robot Mitsubishi RV-2AJ with the help of program tools that include two software packages – SolidWorks i NI LabVIEW. The main purpose of the simul...
Clamping and Suspend Systems to Manipulations Docking Ramps
This paper presents a comparative analysis of two proposed solutions to achieve the handling and transport platforms docking. The proposed solutions are analyzed by finite element method and validated by laboratory exper...