COMPARISON OF LOW AND HIGH FREQUENCY FATIGUE TESTS
Journal Title: Production Engineering Archives - Year 2017, Vol 0, Issue
Abstract
The paper presents the results of low and high frequency fatigue tests carried out on nodular cast iron. The specimens of synthetic nodular cast irons from three different melts were studied in the high cycle fatigue region (from 105 to 108 cycles) using fatigue experimental equipments for low and high frequency cyclic loading. Low frequency fatigue tests were carried out at frequency f 120 Hz using the fatigue experimental machine Zwick/Roell Amsler 150HFP 5100; high frequency fatigue tests were carried out at frequency f 20 kHz using the ultrasonic fatigue testing device KAUP-ZU. Both fatigue tests were realised at sinusoidal cyclic push-pull loading (stress ratio R = –1) at ambient tem-perature (T = 20 5 °C).
Authors and Affiliations
Alan Vaško, Juraj Belan, Lenka Kuchariková
Keywords
Related Articles
- EP ID EP269730
- DOI 10.30657/pea.2017.17.03
- Views 102
- Downloads 0
AN OFFLINE PATH PLANNING METHOD FOR AUTONOMOUS VEHICLES
Driving a road vehicle is a very complex task in terms of controlling it, substituting a human driver with a computer is a real challenge also from the technical side. An important step in vehicle controlling is when the...
THE ASSESSMENT OF CASTINGS QUALITY USING SELECTED QUANTITATIVE METHODS
Aluminium alloys represent an important category of materials due to their high technological value and wide range of applica-tions. The alloys of the Al-Si-Cu system have become increasingly important in recent years, m...
Identifying variables that influence manufacturing product quality
In the article a risk analysis of the production process of selected products in a plant producing votive candles was conducted. The Pareto-Lorenz diagram and FMEA method were used which indicated the most important area...
Fatigue testing structural steel as a factor of safety of technical facilities maintenance
Guarantee of quality and safety exploitation of machines and equipment is a significant factor in the design and manufacture of these compo-nents. This paper presents an analysis of fatigue test results of samples in the...
THE ANALYSIS OF MACHINE OPERATION AND EQUIPMENT LOSS IN IRONWORKS AND STEELWORKS
The article presents a case study of the identification and analysis of operating and equipment losses in a steel plant. Losses may be visible in costs resulting from premature wear of machine and equipment components, r...