Contributions in the Domain of the Contact Stresses Between Cylinders of Cold Rolling
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2008, Vol 31, Issue 2
Abstract
Elasto-plastic contact stresses between working cylinder and support cylinder of cold rolling using FEM are presented in this paper. Pressure and tractions resulted from the rolling process were obtained by using a calculus program and they were used as loads on a working cylinder.
Authors and Affiliations
A. D. MAIMON, D. BOAZU, L. STOICESCU
Keywords
Related Articles
- EP ID EP658984
- DOI -
- Views 60
- Downloads 0
Study Regarding Gravimetrical Corrosion of the Superficial Layers Obtained through Electrical Discharge
The experimental research was made on superficial layers laid-down through electrical sparking on the steel carbon OLC 45 probes, the used electrode being made from a corrosion resistant material (Copper). The probes was...
Tribological Behaviour of Nitrocarburized Superficial Layer after Thermo-Magnetic Treatments Applied to Steels, During Friction Process
Two types of steels subjected to a nitrocarburized thermo-chemical treatment after thermomagnetic treatments. The contact problems are studied employing the concept of tribosystem and tribomodel. The structural aspects i...
Experimental Equation of Deformation Behaviour of a Concrete Steel
The plastic deformation behavior is defined by the function of the deformation strength according to the strain, strain rate and temperature as the factor of the deformation process. The behavior law establishes by the e...
Grain Refinement in Aluminum Alloys by Acoustic Cavitation Phenomena
In this article, ultrasonic method of transmitting forced vibrations to solidifying aluminum-alloy melts is presented. In the presence of well developed cavitation situations, a fine and homogeneous microstructure has b...
Research on Influence of Metallurgy Factors on the Quality of Metal Components in Metal-Ceramic Prosthetic Restorations
The paper summarizes the characteristics of the metal component in the structure of metal-ceramic fixed prostheses and the technological conditions for obtaining it. The paper presents partial results of an experimental...