Critical Analysis of “Maximum Stress Failure Criterion” for Composite Materials
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 1
Abstract
The paper deals with critical considerations upon different points of view that were enounced by some authors referring to Maximum Stress Failure Criterion for composite materials. The considerations stem both from a comparative analysis of the mentioned theories and from the results of theoretical and numerical tests performed by the authors.
Authors and Affiliations
Ion FUIOREA, Dumitriţa STĂNICĂ
Keywords
Related Articles
- EP ID EP656445
- DOI -
- Views 56
- Downloads 0
A New Vision Concerning the Generation and Administration Municipal Residues
In average urban, administration of municipal waste is realization in organized way by dint of own specialize services of his city halls of firms of salubrity. Proportion urban populations serve of services of bred at 7...
Surface Hardening Over 38MoCrAl09 Steel by YAG:Nd Pulse Laser
Laser offers unique capabilities for high energy concentrations at small surfaces. Factors that have influences over interactions between laser beam and steel surfaces have very high control. Pulse laser YAG:Nd is usuall...
Behavior of Cold Rolling Emulsions in the Obtaining Process of Steel Strips
The research was focused on determining an optimum rolling emulsion to be used on a cold rolling mill from Galfinband Galati Romania. In this plant are obtained steel strips with the thickness of 0.7-0.8 mm. The main par...
Preparation and Characterization of Tin Oxide Thin Films
Tin oxide (SnO) thin films were prepared onto glass substrates by thermal evaporation under vacuum. The substrate temperature was kept constant at 300 K during the film growth. The structural studies using transmission e...
Studies and Researches on Obtaining Electrochemical Composite Coatings in Nickel - Ni / Kaolin Matrix
The paper presents the electrochemical obtaining of nickel matrix composite coatings using kaolin particles as dispersed phases. Watts electrolytes were used, with a pH = 4.5 current densities of 6, 9, 12 A/dm2, a disper...