Corrosion Behavior of Ni-P Coated Steel Strips
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2015, Vol 38, Issue 3
Abstract
In addition to high hardness, Ni-P coatings obtained by the electroless method are widely used due to their high corrosion resistance. The corrosion resistance depends on the content of phosphorus in the coating. Various phosphorus contents result from changes in pH in the process of obtaining layers. The layers obtained in different working conditions were tested for electrochemical corrosion. Tests were conducted on a potentiostat PGP 201. There were plotted and analyzed the anodic polarization Tafel curves for different phosphorus contents, pH conditions and timeexposure in the coating bath. Analyzing the anodic polarization curves it is noticed that low phosphorus sample shows an almost continuous corrosion process while samples with high phosphorus content have slow corrosion in the 3.5% NaCl testing medium.
Authors and Affiliations
Gina Genoveva ISTRATE, Tamara RADU
Challenges in Corrosion Protection Using Vegetable Extracts as Inhibitors - Electrochemical Studies
Corrosion is an irreversible chemical or electrochemical reaction of a material with its surrounding environment or medium which results in consumption of the material or in dissolution into the material of a component o...
Integrated Analytical Study for the Somes Metalic Artefact Discoveri in Ibida Site, Romania
The paper presents the results of the analyses conducted using the SEM-EDX and micro-FTIR co-assisted techniques, on several metallic artefacts unearthed during the excavations at the (L)Ibida archaeological site in Slav...
Influence of the Nanoparticles Size on the Permeation Properties of the Polymeric Membranes
In this study, polyethersulfone (PES) membranes blended with zinc oxide nanoparticles (ZnO) were manufactured by diffusion induced phase inversion in NMethyl-pyrrolidone (NMP) as solvent and deionized water as coagulant,...
Experimental Shooting with Thor-1 Disruptor: New Type of Gas Device Used to Neutralize Improvised Explosive Devices
The paper presents experiments conducted with disruptor THOR-1, a new type of gas-dynamic device used to neutralize improvised explosive devices. Disruptor THOR-1 [1] was designed and practically built as a gas-dynamic d...
Determining the Reliability of Clincher Coolers
For any industrial entity that is put into operation, the problem of maintaining its functioning if possible, with corresponding technical and technological parameters without failure is an important issue. This is provi...