Degradation of Rhodamine B Using Divalent Cobalt Ion/Peroxymonosulfate
Journal Title: 河南科技大学学报(自然科学版) - Year 2018, Vol 39, Issue 5
Abstract
Divalent cobalt ion [Co (Ⅱ) ] decomposed peroxymonosulfate (PMS) to produce sulfate radical anion (·SO4-) , which was used to break down aqueous rhodamine B.The instantaneous concentration of rhodamine B was detected by using synchronous and continuous spectrophotometric technology with detecting frequency 12 s-1.The results show that the degradation rate of rhodamine B is 100% after 60 s at 0.021 mmol/L of initial rhodamine B concentration, 0.026 0 mmol/L of Co (Ⅱ) concentration, 0.260 mmol/L of PMS, 5.0 of pH value and 25 ℃.The degradation reaction process of rhodamine B follows pseudo-first order kinetic equation.The possible degradation mechanism of rhodamine B is speculated by using gas chromatography-mass spectrometry to analyze by-products of reaction.
Authors and Affiliations
Beibei LIU, Hang XU, Hong LI
Interface Layer Structure and Properties of Cu / Al Compound Plate
The Cu / Al composite plate was prepared by twin-roll casting. Peel testing and tensile testing were used to test mechanical properties of Cu / Al composite. The scanning electron microscope( SEM),energy dispersive spect...
Event-Triggered Robust Control for Model-Based Networked Control Systems
The robust control for a model-based networked control system under an event-triggered transmission scheme was investigated. By constructing an event-triggered transmission scheme that depended on the sampled states of b...
Vertical Loading Behavior Analysis of Floating Pile in Finite Soil Layer
To investigate the vertical loading behavior of floating pile, the soil column under the pile bottom was assumed to be an extending fictitious pile shaft. By means of the unified function of the soil-pile column modulus,...
Hybrid Voltage Control of Micro-Grid
Aimed at the micro-grid power quality of multi-objective and real-time control, the technique of internet of things ( Io T) and the hybrid control theory were introduced into micro-grid control. The control system was co...
Application of Analytic Hierarchy Process to Tunnel Cutting Blasting
In order to quantitatively analyze the affecting parameters of the tunnel cutting blasting, the parameter index system of tunnel cutting blasting was established by using the analytic hierarchy process ( AHP) . The impor...