Experimental of Mechanical Effect Weakening of Acid-contaminated Red Clay in Guilin
Journal Title: 河南科技大学学报(自然科学版) - Year 2019, Vol 40, Issue 4
Abstract
The representative red clay in Yanshan area of Guilin was selected as the test soil sample, and hydrochloric acid was used as the acid pollutant to prepare 3 different concentrations of acid solution. The hydrochloric acid solution mass fraction and the time of red clay in acid solution immersed were taken as the influencing factors to reveal the weakening mechanism of mechanical effect of acid polluted red clay. The results show that the compressibility of acid-contaminated red clay is enhanced, the shear strength is reduced, and the cohesive force is reduced. The weakening is more obvious with the increase of acid concentration and curing time. The mechanical effect weakening of acid-contaminated red clay results from the reduction of Fe2O3 and Al2O3, the increase of SiO2 content, the dissolution and ion-exchange of CaCO3 and MgCO3.
Authors and Affiliations
Chunmei MU, Qinga FU, Yichang LIU
Effect of Void Fraction on Viscosity of Lubricating Oil
Turbine oil and Nitrogen gas were mixed to produce a gas-oil two-phase flow to study the effect on viscosity of the lubricating oil of the variation of the gas void fraction under different ventilation flow. The gas void...
Degradation of Rhodamine B Using Divalent Cobalt Ion/Peroxymonosulfate
Divalent cobalt ion [Co (Ⅱ) ] decomposed peroxymonosulfate (PMS) to produce sulfate radical anion (·SO4-) , which was used to break down aqueous rhodamine B.The instantaneous concentration of rhodamine B was detected by...
Motor Fault Detection by Displacement Detection and LSSVM
Displacements between stators and rotors were the main reasons for induction motor faults.8 detection coils were pre-placed into the notch grooves of stator core tooth for displacement detection, and they were configured...
Mechanical Properties of Glass Powder Concrete
The preparation process of glass powder (GP) was briefly introduced.The chemical composition, the particle size distribution of different grinding time, and the rate of heat release of hydration were analyzed.The glass p...
Application of Interpolation Method to Conductivity Temperature Compensation System Design
1