Design and Analysis of Composite Dc-Dc Converter for Electric Vehicle
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2017, Vol 12, Issue 6
Abstract
In a electric vehicle powertrain, a boost dc-dc converter enables reduction of the size of the electric machine and optimization of the battery system. Design of the powertrain boost converter is challenging because the converter must be rated at high peak power, while efficiency at medium to light load is critical for the vehicle system performance. By previously proposed efficiency improvement approaches offer limited improvements in size, cost and efficiency trade-offs. This paper shows how all dominant loss mechanisms in automotive powertrain application can be mitigated using a new composite converter approaches. It is found that the improved composite converter results in a decrease in the total loss. Furthermore, the total system capacitor power rating and energy rating are substantially reduced, which implies potentials for significant reductions in system size and cost.
Authors and Affiliations
Sowmiya . P, Dr. C. Govindaraju
Keywords
Related Articles
- EP ID EP388453
- DOI 10.9790/1676-1206020110.
- Views 148
- Downloads 0
A high stable on-chip CMOS temperature sensor
A high stable CMOS temperature sensor is presented. A low-pass filter circuit is added in the output of traditional CMOS temperature sensor to improve the stability of its output,. The supply power voltage of the tempera...
An Overview on Power Quality Issues In Smart Grid
Power quality is a term used to describe a wide range of electrical power origin, monitoring and measurement. This paper presents an overview of power quality issues in smart grid. Power quality is related to the quality...
Improve Recovery Algorithm of MWC sy
Multiband signal is a typical signal in the realm of modern communications, whose spectrum is the sum of several narrow band signals in frequency domain. Modulated Wideband Converter (MWC) system, which is based on the e...
Modelling and Control of a Chopper using Feedback and Feedforward Control Schemes
Designing two degree of freedom controller to control the boost chopper system is challenging. A new feedforward combined with feedback controller design is proposed. Increasing the efficiency of the DC-DC converters can...
Comparison Analysis of Zeta PFC Converter to Improve Power Quality Improvement by PI Controller, Hysteresis Controller and Fuzzy Logic Controller for Speed Control of Induction Motor
This project “comparison analysis of ZETA PFC converter to improve power quality improvement by PI Controller, Hysteresis controller and Fuzzy logic controller for speed control of a Induction Motor”is composed of anisol...