Design and Analysis of Connecting Rod for Different Material Using Ansys Workbench 16.2
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 5
Abstract
connecting rods are practically generally used in all varieties of automobile engines. Connecting rod acting as a converting intermediate link between the piston and the crankshaft of the engine, by the reciprocating motion of the piston to the rotary motion of crankshaft. Thus, this study aims to carry out for the load strain, stress, total deformation and analysis of factor of safety of pin end of the connecting rod of different materials. Generally connecting rods are manufactured using carbon steel and in recent days aluminium alloys are used for manufactured the connecting rods. In this work existing connecting rod material are replaced by beryllium alloy and magnesium alloy. Fea analysis was carried out by considering five material aluminium 360, forged steel, titanium alloy, ti-13v-11cr-3al, magnesium alloy, beryllium(alloy 25). In this study a solid 3d model of connecting rod was developed using solid works-2016 software and analysis was carried out by ansys 16.2 software and useful factors like stress, strain etc. Were obtained. Our main objective to determine best material for connecting rod after analysing at ansys workbench 16.2.
Authors and Affiliations
Vikas Singh, Sumit Kr. Verma, Harish Chandra Ray, Vishal Kr. Bharti, Abhinesh Bhaskar
Keywords
Related Articles
- EP ID EP24221
- DOI -
- Views 277
- Downloads 10
Comparision of Seismic Behaviour of Regular and Vertical Irregular Structure by using Pushover Analysis
There are different analysis methods to study the seismic behavior of RC building frame. In present study the seismic analysis of building frame is carried out by using pushover analysis. Pushover analysis is non-linear...
Relaiblity and Fault Analysis in On-Chip Network
System on chips towards multicore design for taking advantage of technology scaling and also for speeding up system performance through increased parallelism in the fact that power wall limits the increase of the clock...
Surface Roughness analysis of drilling on GFRP composites by experimental investigation and predictive modeling
Glass Fiber Reinforced Plastics composites have an increased application in recent days, due to its enhanced structural properties, Mechanical and thermal properties. Drilling of holes in GFRP becomes almost unavoidable...
Comparison Study between 1/2 Rate And 2/3 Rate Convolutional Encoder with Viterbi Decoder
As the need for bandwidth by bandwidth application became extremely alarming, the need to design a good encoders and decoders for the next generation wireless communications system became very imperative. Convolutional...
Document Constellation for Rhetorical Associate Analysis
In this paper PC rhetorical analysis investigation, thousands of files ar usually surveyed. during this abundant of the information in those files consists of formless manuscript, whose investigation by PC examiners is...