Design and Analysis of Low-Cost Ferrite Permanent Magnet Assisted Synchronous Reluctance Rotor and Permanent Magnet Synchronous Rotor with Flux Concentrator
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2014, Vol 38, Issue 38
Abstract
Rare-earth magnets which are the best solutions for PMSM rotors are expensive which makes that other types of motors are used in the applications. The solution of the replacement of these motors with PMSynRM that use low-cost type of ferrite magnets becomes more tempting lately. This paper proposes two different types of low-cost ferrite solutions: first a V permanent magnet assisted synchronous reluctance rotor (VPMSynRM) and the second a permanent magnet synchronous rotor with flux concentrator (PMSM-FC) as an alternative solution to the rare earth inserted tangential permanent magnet synchronous motor (PMSM). For the first situation, this paper proposes two topologies of PMSynRM: with one row and respective two rows of flow barriers, equipped with ferrite magnets Finite element (FEM) approach has been utilized to show the performance of the proposed rotors. The purpose of the proposed solution is to replace only the rotor of such a PMSM that is already in production, so the size of the stator and the number of windings will remain unchanged. Finally, for the PMSM-FC, the experimental results have been shown. This one is considered competitive, taking into account the resources required for a limitedseries manufacturing. The motivation of this study is to reduce the cost of the rotor by changing the type of PM and by the choice of suitable rotor geometry.
Authors and Affiliations
S. Musuroi, C. Sorandaru, D. Vatau, M. Weinman, V. N. Olarescu
Keywords
Related Articles
- EP ID EP142601
- DOI -
- Views 134
- Downloads 0
SINGLE-SPOOL JET ENGINE FOR AIRCRAFT WITH AFTERBURNING SYSTEM
This paper deals with a single-spool single jet engine with afterburner for thrust augmentation. The afterburning system consists of a special combustor with its own fuel pump, turned round by the engine’s spool and oper...
Concerning the Automatic Computation of the Electrical Stresses in the High Voltage Substations during the Transient Regimes
This paper deals with an automatic computation program using a Matlab graphical user interface GUI useful to compute electrical stresses which appear in the high voltage substations; that means the parameters computation...
LOW POWER GENERATING SYSTEM, SIMULATION AND ANALYSIS
Most distributed generating systems (DG) are not new in a technological respect, they are receiving increased attention today because of their ability to provide backup power, improved power quality, and ancillary servic...
CPC−Founded Clarification of Decline of the Effectiveness of the Energy Transfer in Power Systems
The paper is focused on physical phenomena that degrade the effectiveness of the energy transfer in electrical systems when voltages and currents are nonsinusoidal and asymmetrical. The Currents’ Physical Components (CPC...
Optimal Heating Time for Cylindrical Items Removal from the Shaf
For easy removal of cylindrical items from the shaft, they are heated on their external cylindrical surface for thermal dilatation. The best result is obtained if the temperatures gradient inside the item is highest on t...