DESIGN AND ANALYSIS OF MULTIBAND OCTAGONAL MICROSTRIP PATCH ANTENNA WITH DIFFERENT ANNULAR RING
Journal Title: ICTACT Journal on Microelectronics - Year 2016, Vol 2, Issue 2
Abstract
Microstrip patch antennas are available in different shapes and sizes. In this paper octagonal Microstrip patch antenna is designed. The octagonal patch antenna is simulated with different diameter concentric circles with improved gain. When the difference between major and minor diameter of the concentric circle improves, gain also improves. If the number of concentric circle increases the number of resonating frequency also increases. The major and minor diameter difference of 1.5mm gave the highest bandwidth of 332MHz and return loss also improved by 26.1009dB. Gain of the antenna for this new design is increased by 4dB, Band width is improved by 29.518%, and Return Loss is improved by 64.958% for the Concentric Circle 2.647/0.578. The HFSS software is used to simulate the new antenna
Authors and Affiliations
Swagata B. Sarkar
DESIGN OF LOW POWER VCO ENABLED QUANTIZER IN CONTINUOUS TIME SIGMA DELTA ADC FOR SIGNAL PROCESSING APPLICATION
An accurate design of low power Voltage Controlled Oscillator (VCO) enabled quantizer in Continuous Time Sigma Delta ADC in 180nm CMOS technology using Tanner EDA tools is done. The proposed architecture consists of the...
FPGA BASED STANDALONE EMBEDDED WEB SERVER FOR REMOTE CONTROL OF DISPLAY DEVICES
The Field Programmable Gate Array (FPGA) devices are quickly replacing the microcontrollers for embedded applications since they offer both the performance of hardware and flexibility of software computing. Custom logic...
SIMULATED ANNEALING ALGORITHM FOR MODERN VLSI FLOORPLANNING PROBLEM
In floorplanning, our aim is to determine the relative locations of the blocks in the chip and the objective is to minimize the floorplan area, wirelength. Generally, there are so many strategies in VLSI floorplanning li...
PERFORMANCE ANALYSIS OF ADIABATIC TECHNIQUES USING FULL ADDER FOR EFFICIENT POWER DISSIPATION
Adiabatic circuits are low power circuits, which deals with reversible logic that it stores the power and gives it back again. Currently Several Adiabatic techniques have been adopted for efficient power dissipation. The...
CHIRP REDUCTION IN A SINGLE MODE DM-SQW-DFB LASER OPERATED AT SECOND QUANTIZATION STATE
We have observed the reduction in the chirp parameters (gain compression and above threshold a-factor) by operating the single quantum well laser at second quantization state. In this study, the carrier density at thresh...