Design and Fabrication of Car Exaust Muffler
Journal Title: Bonfring International Journal of Industrial Engineering and Management Science - Year 2018, Vol 8, Issue 2
Abstract
IC engines are one of the major sources of noise pollution. Mufflers are generally found with exhaust system. After the combustion the high intensity gas pressure through the muffler chamber and some of the gases reflected again passes through the combustion chamber it is called back pressure. It creates vacuum pressure in combustion chamber and decreases the engine performance. Reduction of weight, increasing the capability of noise absorption from the muffler with minimal back pressure can increase the performance of the engine. The objective of this study is to optimize noise level of engine and reduce back pressure. This project mainly targets on designing a muffler to reduce the noise and back pressure. Based on new muffler design parameters, a model is fabricated and tested.
Authors and Affiliations
Ajaykanth A, Aravinth G, Bharath C, Gokulnath G, Govindaraj R
Keywords
Related Articles
- EP ID EP404802
- DOI 10.9756/BIJIEMS.8363
- Views 128
- Downloads 0
Bio Fouling Prevention Using Silicone Oil based Composition
Adhesion of the marine fouling microorganisms on the ship hulls causes many problem including extra energy consumptions, high maintenance cost and corrosion. Preventing marine biofouling is an important issue. we report...
Investigation of Effect of Thermal Stresses on Damping and Thermal Expansion Behavior of Al/Al2O3 Metal Matrix Composites
The present investigation is based on the effect of thermal residual stresses on the both thermal expansion and damping behavior of Al/Al2O3 Metal Matrix Composites (MMCs) processed by compo casting. Thermal expansion an...
Is Sentiment Analysis in Social Media Influence the Business Growth of Tamilnadu Tourism?
This paper is an exploratory study of how Social Media Sentiments influence the business growth of Tamilnadu Tourism. Sentiment Analysis deals with the analysis of emotions, opinions, facts and sentiments in the sentence...
Improving HN Fuse Link Process & Product Quality using Six Sigma Methodology
This paper deals with manufacturing of five different types of fuses namely HN-000, HN-0, HN-1, HN-2, HN-3. Company had found that rejection of fuses of all types was more than 7%. This research paper is based on impleme...
Effect of Welding Speed on Mechanical Properties of Friction Stir Welded Copper
Fusion welding of copper and its alloys tends to degrade the mechanical strength at the weld joint area due to high thermal diffusivity and high melting point. Friction Stir Welding (FSW) is an excellent alternative for...