Design and Implementation of an Optimal PV Refrigeration System in the Smart Grid Considering Multi-objective Optimization

Journal Title: روش های هوشمند در صنعت برق - Year 2017, Vol 8, Issue 32

Abstract

Today, optimization in power systems is an unavoidable necessity. Energy intensity reduction in electrical devices and enhancement of their efficiency and performance, electricity loss reduction and voltage profile improvement of the power grid are some instances of optimization usage in power systems. Refrigerated systems, such as refrigerators, can, in addition to exploiting PV systems in a power grid, be part of the supply and demand of electrical energy, so that they store energy as energy and, in the necessary conditions, allow Energy to injecting into the power grid by a photovoltaic system. In this paper, the design and construction of a photovoltaic refrigeration system connected to the network and its optimal performance is discussed. The objective cost and refrigerating temperature functions are considered as two main goals and the final answer is chosen by using the non-dominated sorting genetic optimization algorithm and then using the weighted sum model method. The simulation results with MATLAB software as well as the results of implementing the proposed system's hardware system in the project verify both the performance and the optimal performance of the proposed system.

Authors and Affiliations

Rasool Javizadegan, Mehdi Mahdavian

Keywords

Related Articles

Outage Probability of Cognitive Relay Network Considering the Interference from Primary Users on the Secondary Relay and Reciver

Cognitive Relay network is a plan to remove some problem such as the limited Coverage and limited spectrum. This strategy permit secondary users to use a frequency band( spectrum), which is dedicated to the primary users...

A review on power reducing methods of neural recording amplifiers

Implantable multi-channel neural recording Microsystems comprise a large number of neural amplifiers, that can affect the overall power consumption and chip area of the analog part of the system.power, noise, size and dc...

Radio Band Utilization Improvement in Wireless Mesh Networks for Multicast Routing

This paper addresses the cross-layer design for multicast routing in Multi-Radio Multi-Channel Wireless Mesh Networks (MRMC-WMNs) with directional antennas. WMNs have a limited capacity because of existence of interferen...

Design and Implementation of a Web-based Greenhouse Remote Monitoring System with Zigbee Protocol and GSM Network

In modern and big greenhouses, it is necessary to measure several climate parameters to automate and control the greenhouse properly. Monitoring and transmitting by cable may lead to an expensive and stiff measurement sy...

Simultaneous Design and Simulation of Synergetic Power System Stabilizers and a Thyristor-Controller Series Capacitor in Multi-Machine Power Systems

Power system stabilizers (PSSs) are usually utilized for damping synchronous generator torque in order to reduce these oscillations by producing complementary control signals for the generator excitation system. In this...

Download PDF file
  • EP ID EP317694
  • DOI -
  • Views 102
  • Downloads 0

How To Cite

Rasool Javizadegan, Mehdi Mahdavian (2017). Design and Implementation of an Optimal PV Refrigeration System in the Smart Grid Considering Multi-objective Optimization. روش های هوشمند در صنعت برق, 8(32), 39-50. https://europub.co.uk/articles/-A-317694