Design and simulation of a new sample and hold circuit with a resulation of 12-bit and a sampling rate of 1 GS/s using a dual sampling technique

Journal Title: روش های هوشمند در صنعت برق - Year 2018, Vol 9, Issue 34

Abstract

In this paper, a new sample and hold circuit (S & H) with a 12 bit resolution and sampling rate of 1 GS/s is proposed using dual sampling technique. The dual sampling technique allows the circuit to always operate in higher speed and sampling rates. Furthermore, Transmission gates (TGs) are used to reduce the errors caused by nonlinear input switches because TGs have a more linear resistance in comparison with complementary- metal-oxide-semiconductor (CMOS) conventional switches. The proposed S & H circuit is simulated in the HSPICE using 180 nm CMOS and 45 nm CMOS technologies. Simulation results in both technologies with 1.8 V power supply and have power consumption of 8mW and 300 μW, respectively. Moreover, simulation results show a 12 bit resolution in both technologies, for 50.29 MHz and 43.45 MHz input frequency, for 180 nm and 45 nm respectively while the sampling frequency in both technologies is equal to 1 GHz.

Authors and Affiliations

Najmeh Chamanpira, Seyed Mohammad Ali Zanjani, Mehdi Dolatshahi

Keywords

Related Articles

Evaluation of the Trajectory Sensitivity Analysis of the DFIG Control Parameters in Response to Changes in Wind Speed and the Line Impedance Connection to the Grid DFIG

Economic and environmental conditions often make large stations and transmission lines, restrictions are placed. Small and medium-sized production units connected to existing systems as a strategy is in progress. These u...

Novel Fuzzy-IWO Method for Reconfiguration Simultaneous Optimal DG Units Allocation

This paper presents a new hybrid method for optimal multi-objective reconfiguration simultaneous determining the optimal size and location of Distributed Generation (DG) in a distribution feeder. The purposes of this res...

Skin lesion classification from dermoscopy images using color and shape features

In this study, a new algorithm for dermoscopy image classification into two types of malignant and benign is presented. At first, one preprocessing step to remove noise and also enhance image quality is performed. After...

Magnetic Induction Tomography: A Review of Process and Medical Tomography Systems

Being a non-contact safe imaging technique, MIT has been an appropriate method for non-invasive and non-destructive industrial and medical imaging. In this imaging method, a primary magnetic field is applied by one or mo...

Condenser microphone with small size and high sensitivity Using a circular diaphragm with fixed center

In this paper, a new single-chip MEMS capacitor microphone on a silicon wafer by minimizing the size and the reduction of mechanical strength using a circular diaphragm with a fixed center is proposed. In the proposed mi...

Download PDF file
  • EP ID EP569233
  • DOI -
  • Views 65
  • Downloads 0

How To Cite

Najmeh Chamanpira, Seyed Mohammad Ali Zanjani, Mehdi Dolatshahi (2018). Design and simulation of a new sample and hold circuit with a resulation of 12-bit and a sampling rate of 1 GS/s using a dual sampling technique. روش های هوشمند در صنعت برق, 9(34), 3-10. https://europub.co.uk/articles/-A-569233