DETERMINATION OF THE FRICTION COEFFICIENT IN THE FOIL-ROLLER COMBINATION
Journal Title: Tribologia - Year 2018, Vol 282, Issue 6
Abstract
In order to verify and select the appropriate materials for cooperation in high-speed foil bearings in the particular tribological pair, a series of friction and wear tests of selected material pairs were carried out. This paper presents a method for determination of the friction coefficient, a basic quantity characterizing two materials cooperating frictionally in an atypical tribological combination of the foil-roller type. Laboratory tests, necessary to determine the friction factor value in the mentioned friction junction and in a low-boiling liquid environment, were carried out on a specially prepared test stand using the T-27 apparatus.<br/><br/>
Authors and Affiliations
Wiesław KOMAR, Waldemar DUDDA
Keywords
Related Articles
- EP ID EP432541
- DOI 10.5604/01.3001.0012.8426
- Views 44
- Downloads 0
TRIBOLOGY OF THE BOUNDARY LUBRICATION
After explaining the occurrence of dry friction conditions and how loads influence the friction coefficient, the authors described the technical conditions under which the liquid lubrication takes place. Liquid friction...
MODIFYING THE LUBRICATING PROPERTIES OF OILS USED IN JET ENGINES AND FLIGHT CONTROL SYSTEMS
The article presents the problems of lubrication and types of lubricants used in jet engines. The results of tribological properties were presented: weld point Pz, load-wear index Ih, last nonseizure load Pn, seizure loa...
Tribochemiczna modyfikacja warstwy wierzchniej polimeru w kontakcie ślizgowym z żelazem Armco
Badano stopień tribochemicznej modyfikacji powierzchni współpracujących w ślizgowym kontakcie ciernym polimer–metal pod kątem obecności jonów metalu przeniesionych do przeciwpróbki. Metodami ToF-SIMS, RBS oraz SEM-EDS po...
EVALUATION OF SELECTED PROPERTIES OF A SURFACE LAYER AFTER MILLING USING INSERTS WITH DIFFERENT COATINGS
The article presents a comparison of results of measurements of the geometrical structure of milled surfaces with inserts with different coatings. The study was done on a vertical milling centre. The first step was to de...
Kompozyty o osnowie metalowej zawierające cząstki węgla szklistego wykorzystane do pracy w warunkach tarcia
W pracy przedstawiono wyniki badań właściwości tribologicznych materiałów kompozytowych na osnowie stopu aluminium zawierających cząstki węgla o strukturze amorficznej. Do modyfikacji właściwości tribologicznych użyto wę...