Determination of the Material Relative Permittivity in the UHF Band by Using T and Modified Ring Resonators
Journal Title: International Journal of Electronics and Telecommunications - Year 2016, Vol 62, Issue 2
Abstract
The complete methodology of designing T- and modified ring resonators in the UHF band are presented in the paper. On the basis of proposed algorithms, the dedicated software tool has been elaborated in order to determine material parameters of contemporary substrates. The program is implemented in the Mathcad environment and it includes the base of information on known materials used in electronic products. Also, test sample series for selected substrate materials (IS680, FR408, I-SPEED PCB ISOLA and A6-S LTCC FERRO) and operating frequencies from 1 GHz to 3 GHz are analyzed in details. The special test stand with a vector network analyzer has been applied in experiments. The obtained data of relative permittivity measurements and model calculations are described, discussed and concluded.
Authors and Affiliations
Piotr Jankowski-Mihułowicz, Wojciech Lichoń, Grzegorz Pitera, Mariusz Węglarski
Hierarchical Fast Selection of Intraframe Prediction Mode in HEVC
In the new HEVC standard, there are 35 intraframe prediction modes. Therefore, real-time implementations need fast mode pre-selection to reduce the computational load of cost comparison for individual modes. In this pape...
MTCA.4 - modular measurement and control system with sub-nanosecond time synchronization and support for RF applications
The Micro TCA platform is rapidly developing modular technology for measurement and control systems. There are available versions for laboratories, military and aviation. The newest release of the standard (MTCA.4) suppo...
Joint Timing Synchronization and Channel Estimation Using Perfect Sequence in Uplink Time Domain Synchronous OFDMA
Time Domain Synchronous Orthogonal Frequency Division Multiple Access (TDS-OFDMA) is used in mobile broadband wireless access scheme in uplink transmission. This leads to multiple user interference due to timing offset a...
Enhanced European Coordination of Accelerator Research and Development – EuCARD2 – Global and Local Impact
Wide scale, European, infrastructural research projects on accelerator science and technology are under realization since 2003. CARE project was realized during the period 2003/4-2008, and next EuCARD during 2009-2013. N...
Low-Power High-Speed Double Gate 1-bit Full Adder Cell
In this paper, we proposed an efficient full adder circuit using 16 transistors. The proposed high-speed adder circuit is able to operate at very low voltage and maintain the proper output voltage swing and also balance...