DEVELOPMENT OF A METHODOLOGY FOR IMPROVING THE TRIBOLOGICAL PROPERTIES IN DIE PROCESSING USING LASER SURFACE TEXTURING
Journal Title: Tribologia - Year 2014, Vol 255, Issue 3
Abstract
The purposes of this investigation were to measure the positive effects in the lubrication through the application of micro textures made by laser (Laser Surface Texturing). Different types of micro textured patterns were studied, which vary in the quantity of micro cavities, micro cavity diameters, depths of micro cavities, and surface density attacked by micro cavities. It was found that, compared with plain steel surfaces, laser texturing significantly reduces friction and wear.
Authors and Affiliations
Gerardo T. GARZA GARCÍA, Marco T. VILLARREAL GARZA, Alan QUINTERO GARZA, Daniel VAZQUEZ ZUAZUA, Demófilo MALDONADO CORTÉS, Alexis MEDRANO TELLEZ, Rodrigo BERLANGA ZAMARRÓN
Keywords
Related Articles
- EP ID EP263455
- DOI -
- Views 63
- Downloads 0
PROBLEMS OF THE SURFACE LAYER TECHNOLOGICAL FORMING IN THE ASPECT OF THE SCUFFING PERFORMANCE. PART II: THE TOPOLOGICAL APPROACH
The proposition of the topological approach to the technological creation of the surface layer’s scuffing performance is presented in this article. It was recognized, based on the cycle of experiments, that the scuffing...
EXAMINING FRICTION-WEAR PROCESSES OF SELECTED FRICTION PAIRS USED IN THE DISC BRAKES OF THE MOTOR VEHICLES, USING A PIN-ON-DISK T-11 TESTING DEVICE
This article presents the tests results of the friction matching pairs materials used in the disc braking mechanisms of motor vehicles. Subjects of the tests were matching pairs materials, commonly used for the disc brak...
TESTING OF AN EFFECT OF AUTOMOTIVE AND INDUSTRIAL GEAR OILS ON GEAR MICROPITTING
The aim of the work was to assess the influence of the properties of manual transmission fluids (also called automotive gear oils) on the resistance to micropitting of gears. The FZG GT-C/8,3/90 micropitting test method...
Wpływ warstw cynkowych na opory wiercenia
W pracy pokazano sposób ,,smarowania” wierteł powłoką cynkową osadzaną metodą elektrolityczną. W warunkach wiercenia pomiędzy narzędziem i wierconym przedmiotem występuje elektronowe przeniesienie ładunków elektrycznych....
Naciski na ścianki formy zamkniętej podczas zagęszczania mieszanki wapienno-piaskowej
W artykule przedstawiono analizę wpływu zagęszczanych materiałów sypkich, na przykładzie mieszanki wapienno-piaskowej (stosowanej do produkcji wyrobów silikatowych), na ścianki boczne w formie zamkniętej. Na podstawie ba...