DFM & Simulation for Injection Mould of Knob
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
This work deals with injection moulding simulation of Knob, in which the gate location, diameter and the possible defects during the filling& packing phase is determined and warpage effects under variable shrinkage with process parameters. In this simulation process is carried out by using Hyper mesh and Mould Flow Software. In the Hyper mesh phase, meshing works are carried along with thickness assignment. In the Mould Flow phase, material flow, positioning of gate location, gate size and analysis of defects are determined here. The component tested virtually is Knob that used to set/tune the time for a wash in Washing machine
Authors and Affiliations
Minshi Krishna Koya, K. Siva Prasad, M. Siva Krishna, G. Vikas Reddy, Venkata Reddy Sangana
Keywords
Related Articles
- EP ID EP671650
- DOI 10.24247/ijmperdoct201923
- Views 97
- Downloads 0
Design and Development of Self Adaptive Dynamic Vibration Absorber
A new adaptive dynamic vibration absorber (DVA) is proposed for vibration isolation to change in amplitude of vibration in the primary system i.e., simply supported beam under harmonic excitation. Traditional means of vi...
VIBRATION ANALYSIS OF HONEYCOMB SANDWICH PANEL IN SPACECRAFT STRUCTURE
A Spacecraft structure has a cuboid construction and is composed of central cylinder and a number of interconnected honeycomb sandwich panels. A spacecraft structure accommodates all electronic packages and provides adeq...
Design of Pressure Vessel for Improvement of a System in a Process Unit
Vessels that carry, store, or get hold of fluids are known as pressure vessels. A pressure vessel is a containerwith a pressure differential between internal and outside. In the present paper, it has been discussed regar...
Evaluation of Interlaminar Fracture Toughness of Glass Fiber - Epoxy-Modified Composite Materials
Developing efficient wind mill blades with high toughness and good fatigue life is one of the main engineering challenges for wind energy sector globally. FRP is commonly used in aerospace, manufacturing of auto ancillar...
Mathematical and Experimental Analysis of Solar Tunnel Dryer for Drying Beef as a Biological Product
This work analyses the performance of a solar tunnel dryer for drying beef, under forced convection by using a DC blower run by a photovoltaic panel (200w). An experimental setup of solar tunnel dryer has been designed a...