FINITE ELEMENT METHOD ANALYSIS OF THICKNESS OF PLATES
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 3
Abstract
The advance in the improvement of using structural components for the aerospace structure is essential and their importance in the fields of engineering especially in the construction of bridges, floor panels and in the field of the aeronautical domain in the design of the wings and sheet panels. The main objective here is to find the optimum design thickness of the plates. Initially, the optimized selection of the material is chosen and then thickness analysis is carried using the numerical analysis. The results obtained are validated with optimized Computational results. Finally coming out with the improvised live load carrying capacity of the material.
An Analysis of Diesel Water Emulsion in the Direct Injected Diesel Engine
Diesel engines are mostly used in industries and transportation sectors while compared to petrol engines. The Diesel engine produces the emissions such as NOx, HC, PM and CO. It affects the environment and hu...
CHARACTERIZATION OF ADDITIVE MANUFACTURED ABS AND NATURAL ABS SPECIMENS
Additive Manufacturing (AM) is a Rapid Prototyping technique. It is used for producing any real complex parts from the desired 3D CAD models. It can also manufacture prototypes. Additive Manufacturing can utilize raw mat...
Numerical Parametric Study of Crack Parameters Near Crack Tip
It is necessary to measure accurately crack tip parameters to analyze crack and rate of crack propagation in fracture mechanics. Numerous efforts have been made towards the determination of stress intensity factor (SIF)...
CFD Simulation of Solar Loading in Car
A frequent problem faced by the car drivers in Chennai is, the hot suffocating inner of the car following hours of steady solar radiation when parked in an un-shaded area. The heat build-up in the cabin due to solar radi...
An Optimisation of Spray and Performance Emission Characteristic of Biodiesel and its Blends by Varying Injection Timing in Diesel Engine
The main objective is to optimize the various parameters of spray for different blends of biodiesel and Injection pressure mainly with respect to Spray tip penetration Spray cone angle and Sauter Mean Diameter (SMD), usi...