Stress Analysis of A Splice Joint in an Aircraft Fuselage with the Prediction of Fatigue Life to Crack Initiation
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
The objective of this dissertation is to Stress analysis and prediction of fatigue life to crack initiation in an in a transport aircraft fuselage. Typical splice joint panel consisting of skin plates, doubler plate is considered for the study. Aluminium alloy 2024-T351 material is considered for all the structural elements of the panel. A two dimensional finite element-analysis will be carried out on the splice joint panel. A panel consisting of a splice joint of a fuselage is considered for the linear static analysis, and then applying loads and boundary conditions on it. Cyclic pressurization loading is considered.
Authors and Affiliations
Suresh R, Shyamsunder N, Devendra Reddy M
Keywords
Related Articles
- EP ID EP656580
- DOI 10.24247/ijmperdaug201992
- Views 84
- Downloads 0
Study on Effects of Spring Back on Sheet Metal Bending Using Simulation Methods
In emergent engineering world in mainly focused on pre-determined simulation analysis of spring back was successfully optimization of the sheet metal bending process. The most of causes in sheet metal thickness and metal...
Surface Damages Caused by Cavitations at Hood of Howell Bunger Valve and Redesign to Avoid Them
Howell Bunger valve is hydro mechanic equipment which obtains regulation of free water stream with very high flow velocity at small opening. High flow velocity rates are the main reason for the occurrence of cavitations...
A REVIEW ON NATURAL FIBER HYBRID COMPOSITES
In modern industries, the majority of the conventional materials have been replaced by Natural fiber composites due to its high strength to weight ratio, biodegradable, eco-friendly environment, etc. Moreover, natural fi...
The Design and Development of Transitional UAV Configuration
The transitional aircraft configuration is designed and developed, with a transitioning propulsion mounts from a hover mode to forward flight mode. Calculating the appropriate values of design parameters and performance...
THE EFFECT OF OBSTRUCTION ON PRESSURE DISTRIBUTION IN THE DIVERGENCE RIBS DUCT AN EXPERIMENTAL STUDY
An experimental study is carried out of two-phase flow phenomena around obstruction in a divergence rib rectangular duct for two opening divergence angles. The experiments are performed in the duct with the water - air f...