INVESTIGATION ON TORSIONAL VIBRATION OF DRILL STRING IN CYLINDRICAL CAVITIES OF VERTICAL BORE-HOLE WITH LIQUID MEDIUM
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 3
Abstract
The research work deals with the torsional vibration of a drill string in a vertical cylindrical cavity of a borehole with liquid medium. The mechanical interaction models of the drill string with viscous liquid are investigated, Also this paper describes the vibrations of the drill string bit with allowance made for viscous friction, the nonlinear deferential equation with partial derivatives is used. The oscillation scheme of torsional auto-vibration of homogeneous drill string in the form of oscillation pendulum is stated. It was found that the properties of the liquid medium in which the rotating column, lead to a small range of angular velocity value, which are generated during the self-oscillation
Authors and Affiliations
Keywords
Related Articles
- EP ID EP377253
- DOI -
- Views 50
- Downloads 0
Influence of Tool Pin Geometry on Friction Stir Welded 597 Dissimilar Aluminium Alloys - (AA5083 & AA6061
The present examination focuses on the evaluation of process parameters on mechanical properties and microstructure study of Friction stir welded (FSW) unlike Aluminum alloys. Their extent of use is in naval and marine a...
AN ANALYSIS AND CONTROL OF DYNAMIC PROCESSES IN MECHANICAL PARTS OF POWER EQUIPMENT
The article presents an approach to the analysis and control of coupled vibration processes of the part of power equipment in the context of the scientific field, the physics of open systems. Dynamic processes in the cou...
An EPQ Model with Varying Rate of Deterioration and Mixed Demand Pattern
This paper derives the optimal cycle time and total cost of an EPQ model with a variable rate of deterioration and mixed demand pattern. Demand is inventory dependent during the inventory buildup time and constant demand...
Modal and Harmonic Analysis of a Cantilver Beam with Differrent Cross-Sections
Modal analysis helps to determine the system frequencies and to obtain the eigen modes of various structural members subjected to vibration. In this research, modal analysis and harmonic analysis of a cantilever beam wit...
Microstructure and Mechanical Properties of Hot Extruded Mg-3zn-1cu-0.7mn Alloy Produced by Powder Metallurgy
A novel alloy, Mg-3Zn-1Cu-0.7Mn is fabricated using blend-press-sinter powder metallurgy technique, and the microstructural and mechanical properties of the alloy have been analyzed. Also, the effect of the stress-reliev...