Diagnostis of longitudinal welded joints of tubes by the method of magnetoelastic acoustic emission
Journal Title: Вісник Тернопільського національного технічного університету - Year 2017, Vol 88, Issue 4
Abstract
The microstructure of the steel 19H and 17H1S pipes after long-term operation is investigated. Dependence of the magnetoelastic acoustic emission signals characteristic change on the structure of different areas of the welded joint is determined. The effect of residual stresses after welding on the change of the signals amplitude sum of magnetoelastic acoustic emission has been investigated.
Authors and Affiliations
Yevhen Pochapskyi, Bohdan Klym, Marian Rudak, Petro Velykyi
Keywords
Related Articles
- EP ID EP280380
- DOI 10.33108/visnyk_tntu2017.04.105
- Views 68
- Downloads 0
Investigation of characteristic of powder wire with the CUO/Al exothermic mixture
The paper the results of research is presented and the level of influence of the parameters of surfacing and the amount of exothermic mixture in the composition of self-shielding flux-cored wire on the deposition rate fa...
Computer modeling of the stresses in welded truss
The stresses localization in the construction elements of welded roof truss that is 18000x3600 mm and is made of 100х100х10 mm steel rolled L-bar is studied. The nodes are designed without adapters. Computer modeling of...
Power electronic devices based on piezoelectric elements: current state and perspectives
The analysis of existing designs of piezoelectric elements, methods of calculation and electrical circuits connecting held systematizing technical solutions in the design and use of power electronics devices based on the...
Definition and mathematical modeling of the thermostressed state of a two-component thermosensitive cylinder under convective-radial heating
The thermosensitive body model is used in order to implement the requirements of modern engineering practice for the calculation of temperature fields and tensions in multilayer structures operating under high-temperatur...
Calculation of the plate plane stress in polar coordinate system on the basis of Lamé equation general solution
The mathematical model describing plane stress-strain state of plane elastic bodies in polar coordinate system is offered. To describe its three-dimensional stress state, three harmonic functions expressing the general s...