Die Life Prediction and Process of Cold Rotary Forging for Hypoid Gears
Journal Title: 河南科技大学学报（自然科学版） - Year 2019, Vol 40, Issue 1
Abstract
In order to reduce production cost and increase production efficiency, the die life of the cold rotary forging was predicted and the process optimization was carried out. Stress and strain of the die in process of cold rotary forging was obtained by thermal-mechanical coupling finite element numerical simulation method, then the die life under specific process parameters was estimated by mathematical model of the die life estimation. According to calculation results, the die life under different combination of process parameters were analyzed, and influence law of various process parameters on die life was find out. The reasonable combination of the process parameters was determined. The research results show that when the upper die rotation speed, the upper die swing angle and the friction factor are 40 r•min-1, 10° and 0. 14 respectively, the die life reaches 21 464 times. The service life is significantly improved.
Authors and Affiliations
Yugong DANG, Dewei DU, Xiaozhong DENG, Zhenshan GAO
Keywords
Related Articles
- EP ID EP427026
- DOI 10.15926/j.cnki.issn1672-6871.2019.01.004
- Views 57
- Downloads 0
Effect of Rib Stiffness on Stability of Ring-stiffened Functionally Graded Cylindrical Shells with Rib Eccentricity
Based on the Donnell thin shells theory, considering the influence of rib eccentricity, the stability equation of ring-stiffened functionally graded cylindrical shells under hydrostatic pressure was derived by using ener...
Design of Magnetic Field Probe for Antenna Near-field Test
A magnetic field probe was designed for the antenna near-field test in the form of coplanar waveguide. An electromagnetic simulation model was established to calculate S21 and S11 parameters of the probe,and the probe ha...
Design of LCD Touch Controller Based on ARM and FPGA
To overcome the problems of limited frame rates, processor overload, poor portability of current liquid crystal display (LCD) touch screen control technology, a design scheme of LCD touch screen controller based on advan...
Research and Application of AC-20 Modified Ratio with Foamed Asphalt Mixture
The AC-20 modified foam asphalt mixture ratio was studied with a highway project.The optimum foaming condition of asphalt was determined by measuring the physical index of asphalt foaming.The gradation design of mineral...
Analysis and Improvement of Complex Modal Disc Brake NVH Performance
Taking the car disc brake as research objective, the model of disc brake was established by threedimensional drawing software CATIA based on the complex eigenvalue modal theory. The ANSYS Workbench was used to analyze th...